Questions & Answers for: Canon fuser assembly

Question about imageCLASS MF8170C All-In-One Laser Printer

1 Answer

Assembly Unplug the power cord from the wall outlet. The fuser unit and surrounding area can become extremely hot during operation. Perform the following procedure after the fuser unit has cooled down

Ad

Question about imageCLASS MF8170C All-In-One Laser Printer

2 Answers

...fuser assembly. you will have to have a technician fix this. the fuser will probably need to be replaced. I agree with eric400. You generally will have to replace the fuser assembly. I've gotten a ...

Ad

Question about imageCLASS MF8170C All-In-One Laser Printer

2 Answers

...printer ##322 displays due to faulty Fuser Assembly. You can send Fax and receive but cant print due to faulty fuser assembly. Replace fuser assembly to fix your printing problem and error

Question about Image Runner 1630 Copier Copier

1 Answer

a problem with the fuser assembly, not getting hot enough. You will most likely need to replace the fixing film assembly and possibly the lower fuser is bad enough to replace it while the fuser is out

Question about Image Runner 1630 Copier Copier

1 Answer

fuser assembly. Make sure copier is unplugged. You need to remove the glass by removing the left side panel. Remove the two screws and remove the panel. Remove the glass. You should see a ribbon cable

Question about imageRUNNER 400S Copier

1 Answer

...fuser assembly. The bearings for the upper and lower rollers could be bad. If the fuser moves easily, then it could be a white gear that is located on the upper right of the fuser assembly. This is ...

Question about imageRUNNER 400S Copier

1 Answer

...the fuser assembly using the front green fuser knob. Does it seem hard to rotate. Most likely there is a frozen bearing in the fuser assembly. Pull in out and check. Replace the parts that are

Question about ImageClass D660 Copier

1 Answer

...fuser assembly. Then bend back the black milar plastic cover and unplug the three connectors that go to the fuser. Carefully remove the assembly and then remove the two screws at the top of the fuser ...

Question about imageRUNNER 5570 Copier

3 Answers

Assembly. 6. Replace the Main Driver PCB (PCB2) (check the fuse (FU11)). my machine canon ir6055 display error E000840-0001 and E00060-0001 i am all so cheek the machine fuser unit last time automatic

Question about imageRUNNER 5570 Copier

1 Answer

...fuser assembly is not rotating, the drive gear is broken, the bushings inside the bearing is broken or worn out.worst case fuser drive motor. those fusers are rated at 500k. Take the front cover of ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Canon Office Equipment and Supply Experts

old marine
old marine

Level 3 Expert

2426 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Are you a Canon Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...