Questions & Answers for: fuser assembly

Ad

Question about Office Equipment & Supplies

1 Answer

...LaserJet 1012 Fuser assembly USA: RM1-0660-000CN LaserJet 1010 / 1012 / 1015 Fuser Assembly Hewlett Packard 110V Fuser AssemblyEurope HP LaserJet Printer Fuser Units Printer Maintenance Kits And ...

Ad

Question about Computers & Internet

1 Answer

...fuser assembly include the fuser heater lamp? Thanks. Hello, The short answer to your question is "Yes" it is included in the fuser assembly! Long answer: The heater lamp is an integral part of the ...

Ad

Question about LaserJet M3035xs MFP All-In-One Printer

1 Answer

...fuser/output assembly area. It sounds more like it is coming from the output assembly or possibly the network of gears. This can also be caused by the fuser gears. Take out the fuser and look at the ...

Question about LaserJet 1010 Printer

1 Answer

...Fuser Assembly RM1-0660 ---FUSER - 120 Volt Fuser Assembly or parts of this http://www.precisionroller.com/search.php?q=hp+1010&x=12&y=5 FUSER - Lower Pressure Roller :  RF0-1002 FUSER - ...

Question about Infoprint 1572 Laser Printer

1 Answer

...Fuser assembly Fuser to system board cable Check the thermistor cable for correct installation to J5 on the fuser card. If installed correctly, check for correct installation of J10 on the system ...

Question about Panafax UF-9000 All-In-One Laser Printer

1 Answer

...gear. Hmm, that is still a fuser error for sure, was that the same error you had before you replaced the fuser assembly? You did replace the fuser itself with the assembly, correct? Let me know ...

Question about C543dn 26B0000 Workgroup Up to 21 ppm 1200 x 1200 dpi Color Laser Printer

1 Answer

Fuser assembly, 115 V 40X5438 Fuser assembly, 230 V 40X5439 Fuser assembly 100 V Replacing the fuser is not very difficult but you will have to follow certain steps. 1. Remove the right cover assembly

Question about C530dn Laser Printer

1 Answer

...properly. For this error on this Lexmark model ... You have to replace your fuser assembly. (Assembly 115V fuser) (40X3569) I suggest you contact Lexmark Technical Support for further

Question about LaserJet 5550 Printer

1 Answer

...Fuser assembly. For service engineers: Reason: thermo switch open, remove fuser assembly, dis-assemble up sleeve, check switch continuity, if no continuity, remove switch & just hit gently on ...

Question about LaserJet 5550 Printer

1 Answer

...fuser assembly is not rotating, the drive gear is broken, the bushings inside the bearing is broken or worn out.worst case fuser drive motor. those fusers are rated at 500k. Take the front cover of ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Office Equipment & Supplies Experts

jasbo
jasbo

Level 3 Expert

2239 Answers

Marvin
Marvin

Level 3 Expert

85239 Answers

The Knight
The Knight

Level 3 Expert

76407 Answers

Are you an Office Equipment & Supplies Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...