Questions & Answers for: Chrysler where does the freon go in at

...fix this yourself. You will need a Recharge Hose and Gauge kit (about $20) a couple cans of R134A freon (about $8 each) and a can of A/C Stop Leak (about $12). You can buy these from Walmart or ...

Ad

Question about 2002 Town & Country

1 Answer

...work?but warm air-----I swapped relays but it did not change anything-----I?m going to check Freon pressure tomorrow----I hope it is not the automatic climate control cluster usually you have

Ad

Freon level good but ac compressor wont stay on To begin with I checked the freon level and its good, I have a 2001 chrysler 2.7L SFI 6cyl, and I turn my engine on runs fine but then when I turn on ...

Question about 2008 Town & Country

1 Answer

...is low or is a malfunction on the system, it is not going to engage, another thing is also to check the fuse for the ac and relay,the best way is to see how much freon the system has and go from ...

Question about 2000 Sebring

2 Answers

freon gas lasts forever ,try topping the system up with 500grms of gas ,start engine and turn AC on then connect to the low pressure connection and allow compressor to **** the gas in ,job done unless

...go back to warm/hot. Last summer I tried to add freon, however the gauge said it was full and I couldn't get it to take any freon at all. Should i try the freon again now since it blows strictly ...

...freon in my car so air the condioner can cool No you don'tYou know you have a leak, thatneeds to be repairedIt has to go somewhere, doesn't itYour poluting the atmosphere by knowing it is ...

Question about 2007 Sebring Sedan

1 Answer

...modern cars no longer use freon for a/c. You can go to your local auto parts store and get a a/c recharge kit. its simple to use and the directions come with the kit and they are reasonably

...the system youll need to pull a vacuum on it before any coolant is added I'd go with, enough to get the suction line cold, anticipate about 30 oz total from vaccuum point. No more freon, try

...but it won't stay on The clutch is engaged when you have power going to it AND there is enough freon pressure in the system. Check the freon level, if low add some and the clutch should engage ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Chrysler Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...