Questions & Answers for: fork lock

...lock nut on fork tube, adust untill there is no wobble, but free movement, too tight the bearings will collapse too loose the rider will fall off tighten lock nut install headstem tighten headstem ...

change fork lock how do you change fork lock on harley? if you dont know how to change a fork then you shouldnt be riding you inbred

locked forks no movement Sounds like your fork bearings are locked up or the nut just below your handle bar stem is to tight.In any case taking apart the fork and do a quick inspection. Regrease or ...

...fork lock on a 1996 harley davidson FXDS-CONV. Ok, this is how you replace the lock on the front end. 1.Loosen upper triple tree clamp pinch bolts. Remove upper triple clamp and handlebars. 2.Loosen ...

...I LOCK THE FRONT FORK LOCK? turn the handlebars all the way to the left and then turn the ky to the left position that says lock and then you can remove the key with the forks locked in that

fork lock cylinder and I have the and the lock works. I have removed the set screw and cylinder will only move out a little bit. Do I force it out I've tried turning forks and turning key but will not

lock the front brake and try to compress the forks. This should align the forks. Tighten the pinch bolts. Check forks again. If you still have problems someting is wrong like bent fork tube or slider,

...fork lock on my 2000 heritage soft tail.My ignition switch went bad so I bought a kit from my HD dealer. The kit came with switch, plastic plug, and fork lock. I changed the switch now wanting to ...

...fork lock on a 2002 road king Hi Anonymous, for more information on your question please visit the websites below and good luck: 2002 Road King Fork Lock Malfunction Twin Forum Harley Davidson Forums ...

cant unock forks even in ulocked key postion Fork lock may be seized. Try spraying a little WD40 on it. Not on ignition switch but where lock engages on fork yokes.