Questions & Answers for: flame too high

...high in the front and not flame in the back. also the flames in the front are yellow, with small amount of blue. thanks. Flame saftey device control valve stuck in open position that why main gas is ...

pilot light lights but when i turn to low flame comes on but when turned to high setting flame will go out in a few seconds air gas mix racio to high on air.

...low flame will not stay on high flame My Charmglow heater lites just fine then the flame goes to low and will not stay on high flame. I cannot adjust the flame up or down. Pilot sensor or ...

...a pilot flame, the breather around the pilot flame has become dusty. The best way to clean it out is with high pressure air. It wouldn't hurt to clean with high pressure air anyhow. See how that

...high flame or doesn't go to high flame it is a component called an FSD ( flame safeguard device) 2) If the oven does go to high flame after you have lit it but goes low and stays low then it is the ...

...flame goes off. I have by pass the high limit thermostat by connecting the purple and red wires together. The flame stays on. That's the reason I changed the high limit thermostat but did not fix ...

how high should the flame be in a kerosine heater Adjust wick till nice Blue Flame, if wick to High flame turns White/Yellow. Turn down wick till Nice Blue Colour

My symbols show in flames so don't know what is high,low,warm My dial shows1 flame,then 2 flames,then 3 then 3 in a box which ow,high and warm 1 flame low 2 flames med, 3 flames high

...high.I adjust the flame to lowest position(clockwise)The flame is still to high.Please help me.Thnk you.Baky. Try counterclockwise There is an adjustment on the burner or it could be a gas pressure ...

flame up high orange and turn back blue when it settles. If you had it 2 weeks it is under warranty from the maker and from the installer. An orange flame is not quite enough air in the gas mix. It it