...error when turning on the printer Re-position the Encoder Strip on your all in one Printer To re-position the encoder strip, perform the following steps: 1. Remove the power cord from the unit. 2. ...
...error...there is nothing blocking the track nor are my ink cartridges installed incorrectly..... There could be 4 possibilities. 1. Ink cartridges lids are open which is not allowing cartridges to ...
...error:0502.when i open the cover cortridges not moves.but when i shut the cover cartridge is not move. please Resolve this problem. Thank you. Dell AIO Printer A940 service tage:htsnj21 express ...
...error message but cannot see anything blocking. There could be 4 possibilities. 1. Ink cartridges lids are open which is not allowing cartridges to move freely. 2. Ink cartridges carriage will not ...
...encoder strip was re-seated correctly, the Hardware Error: 502 code will not appear. Other faults that can bring up this error is a carriage rail that needs cleaning and oiling (so you might want to ...
Question about A940 All-In-One InkJet Printer
...me what hardware error code 0502 is? Error 502 comes from the encoder strip. Try the instructions located in the second thread at... Cleaning the encoder strip (Loud bang from printer carriage) ...
Question about A940 All-In-One InkJet Printer
error mean to reposition the encoder strip, perform the following step : 1. remove power cord from unit 2. lift the lid of the unit, just bellow the scanner portion of all in one, to expose the inside
error message 0502 hardware ? Re-position the Encoder Strip on your all in one Printer To re-position the encoder strip, perform the following steps: 1. Remove the power cord from the unit. 2. Lift ...
...re-seated, close the lid to the unit. Re-connect the power supply to the All-In-One. Press the Power button. If the encoder strip was re-seated correctly, the Hardware Error: 502 code will not
...error 502. Rick » Reposition the Encoder Strip on the A940 All-In-One Printer To reposition the encoder strip, perform the following steps: Remove the power cord from the unit. Lift the lid of ...
Usually answered in minutes!
995 Questions
574 Questions
608 Questions
501 Questions
509 Questions