Questions & Answers for: electrolux oxygen cord

electrolux oxygen 3 just shut off. I cleaned out hoses and replaced bag. I waited 30 minutes, but nothing happens when I plug it in. No lights come on or anything. This is often caused by a failure of

Electrolux Oxygen 3 I cannot get the power cord to catch and lock after I pull it out to plug it in. My old Electrolux would simply lock the cord each time I pulled it out. This model doesn't seem to ...

Electrolux oxygen series vacs Is there any place to get parts for these vacs online? I have a broken powerhead that I need a motor, and the whole powerhead to wand locking unit. I would also need a ...

...electrolux oxygen 3 ultra Just purchased the electrolux oxygen 3 ultra. I noticed that the cord rewind was very slow at first. I turned off the machine, unplugged the cord, and then stepped on the ...

Electrolux EL 7001 Oxygen 3 power cord continually retracts The cord never locks in place when deployed. The retractor button under the handle has no effect on cord. Cord retracts when button is ...

...cord retract repair I have a electrolux oxytgen3 canister vacum and the cord retract has broke, i am trying to access that area and do not know how to get to it can you help. I see several scews on ...

Electrolux Oxygen 3 model 7020A contols not working I have an Electrolux Oxygen 3 model 7020A wich runs fine for 2 or 3 minutes then while still running the lights all turn on but I can't shut down ...

the power nozzle on my oxy won't click into the wand. Do I need a new wand or a new poer nozzle? you need either a new wand clip or wand. Also, check the cord in the wand.

...Electrolux EL7020A vacuum shuts off every 2 minutes. There's no blockage, suction is good. Its only 6 months old. I change the bag frequently. And all the filters are clean. What could cause ...