Question about Dremel Tools & Hardware - Others
causing the collet shaft to stop, even if the motor is still running. The fix is about $5.00 --- two parts from Dremel. The 275 case is a **** shell that opens with the removal of six T-10 Torx screws
Question about Variable - Speed Multipro Rotary Tool 395
...motor on my dremel 395 works but the bit doesn't turn there is a coupling between the motor and the spindle that has probably cracked or stripped out. I suggest going to Dremel.com and getting an ...
Question about Variable - Speed Multipro Rotary Tool 395
...dremel 396 runs fine(motor) but the shaft(ie the part the chuck hangs off) is not spinning so it's not useable.I can hang on to the shaft with the motor running flat out, there is no drive to the ...
Question about Variable - Speed Multipro Rotary Tool 395
...Dremel tool motor still works but shaft won't turn? Moto-tool #395 by Dremel, the motor works fine but the shaft doesn't turn. Here's the email from I got from Dremel (in my case the flex coupling ...
Question about 8000 01 Cordless Rotary Tool Kit Variable Speed 10.8 Volt Lithium Ion
...DREMEL 10.8 Volt rechargable. While using it, suddenly the motor shaft started feely spinning inside of the the entire mechanism that holds the bit. It is not a couling problem. The motor shaft seems ...
Question about 395 Variable Speed Multipro Rotary Tool Kit
...motor to dremel moto tool model 395 coupling from motor to chuck ruined where do I find the parts? The part that goes between the motor and the chuck is called the CLUTCH UNIT, REF 2615294309 it is a ...
Question about Variable - Speed Multipro Rotary Tool 395
...motor running but the mandral will not turn. How can i order the correct part? bill [email protected] You'll be hard pressed to find parts... you can try Dremel Directly ...
dremel tool. the plastic collar connector between the motor and the shaft dried out and broke. are replacements available? YES. DREMEL HAS THAT PART AT ABOUT $2.00 AND SHIPPING ABOUT $2.50. CALL 1-800
t spin accidently hit lock button with the dremel on. motor runs, shaft won't turn. My motor was turning but the flex shaft wouldn't. I took the flex shaft loose and spun it inside. Works fine now
Question about 400 Xpr Rotary Tool
...motor run, dremel does sell replacement brushes for most of what they mfg. look where ever real dremel bits and tools are sold ck package back to see if your model number is serviced by this brush ...
Usually answered in minutes!
191 Questions
163 Questions
151 Questions
96 Questions