Questions & Answers for: dc07 suction tilted

Question about DC07 Bagless Upright Cyclonic Vacuum

1 Answer

No suction in upright position My Dyson has good suction in the upright position, but when I tilt the handle to vacuum, it looses all suction. Check the adapters at the bottom. They're supposed to ...

Ad

Question about DC07 Bagless Upright Cyclonic Vacuum

7 Answers

...dc07 suction when upright but no suction when tilted in operate position Not sure if this will definitely fix the problem.......but here goes for anyone with the same problem....spoke to Dyson ...

Ad

Question about DC07 Bagless Upright Cyclonic Vacuum

1 Answer

...DC07 Dyson vacuum cleaner. It is not vacumming my floor - I have hardly any suction at all. Do I need to activate something in order to initiate the suction? With vac upright suction is sent to the ...

Question about DC07 Bagless Upright Cyclonic Vacuum

1 Answer

I need more suction. The Head is too high on my carpet. We have owned our dyson for less than a year and it only worked well in the first few months. Something is off. If we manually push the head or ...

Question about DC14 All floors Bagless Upright Cyclonic Vacuum

1 Answer

...dc07 wont work using the hose, i have replaced the hose as it was ripped and have cleaned everything but it still has no suction and makes a horrendous noise when upright. theres a o ring when u tilt ...

Question about DC14 All floors Bagless Upright Cyclonic Vacuum

2 Answers

...suction is making a funny noise.) The DC07 has a short length of clear plastic hose on the underside of the machine. Check this very carefully for splits (pull it off from the motor end and then ...

Question about DC07 Bagless Upright Cyclonic Vacuum

1 Answer

...suction or turn at the brush bar. The wand works and I already checked/cleaned all the areas the instrucion manual said to. The DC07 has a "brush control system" operated by a knob on the right side ...

Question about DC07 Bagless Upright Cyclonic Vacuum

1 Answer

...tilted to actually clean there is total loss of suction - cannot see blockage anywhere. Thanks for your help. If you are confident there are no blockages, look underneath, where the brush is, and you ...

...suction port covers at both of these locations: Possible Problem #4. If none of the above solutions worked for you, try this last one. The Dyson DC07 models use a clutch mechanism that stops the ...

Question about DC07 Animal Bagless Upright Cyclonic Vacuum

2 Answers

...DC07 model and it won't pick up or stand up Nothing is blocked. something is probably seated incorrectly. there is a curved pipe on the side near the base which changes from hose mode in the upright ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Vacuums Experts

AskDyson
AskDyson

Level 3 Expert

2572 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18429 Answers

Anonymous

Level 3 Expert

43501 Answers

Are you a Vacuums Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...