DVR in the router I can access the remote agent from inside the network at home but form outside the network all I get is a blank page in the browser. If you have any ideas or help it would be greatly
DVR network settings via the main menu function. You will require a IP Address & Passwod. Ensure your ethernet cable is connect from your DVR to your local computer. You will then need the network
network a dvr to lan network Connect the cables from the router or switch to the network card. I suggest giving the DVR a static ip address. Once you have that done you should be able to log into that
...Do start, run, type cmd, press enter. In the black window that comes up type ipconfig /all this will give you the settings the DVR wants. choose manual setup from your DVRs network connection
...DVR says it is connected to network but cant access internet. This configuration worked before with Comcast cable modem but when I switched to DSL no internet. Is there some kind of setting I have to ...
Question about Wj-hd716/4000 16-ch Real-time Dvr - 4 Tb
...dvr i want to see it from network i connect them with switch. when i type my ip and port in IE nothing happens and a blue scrreen apear with model of dvr but nothing else Hi in some case, you need to ...
Question about Wj-hd716/4000 16-ch Real-time Dvr - 4 Tb
...network recorder (+/- DVR)/router?, security/network camera's outside, record activity, consult via software by means of iPhone, I don't have the recording device yet since I don't know what device I ...
Question about SDE-120n 4 Channel DVR System
a new DVR is recommended. If you have network cable connected try it without. My floureon started doing this when i connected to network. It all worked fine on my phone etc but kept randomly rebooting
Question about SDE-120n 4 Channel DVR System
DVR to Network. 2. Press Window Key + R in Your PC and Type "ping -t (DVRIPADDRESS)" if it is giving reply then you are ready to process next step. 3. You need to access your dvr with telnet port (23)
Question about SDE-120n 4 Channel DVR System
DVR to Network. 2. Press Window Key + R in Your PC and Type "ping -t (DVRIPADDRESS)" if it is giving reply then you are ready to process next step. 3. You need to access your dvr with telnet port (23)
Usually answered in minutes!
19,138 Questions
12,216 Questions
7,310 Questions
7,277 Questions
5,472 Questions