Questions & Answers for: cobra 2000 gtl cb radio

Cobra 2000 gtl I just received a Cobra 2000 GTL from Ebay. When the radio is on there is a steady tone, similar to the sound of morse code is the speaker. The volume control has no effect on the tone.

...cobra 2000 gtl I have a ranger 6900 4 pin radio And a rk56 that is 5pin, im trying to rewire the rk56 to a 4 pin do you know the proceedure I have a uniden washington base station thsts off frequency ...

how do i wire a expander 500 to a cobra 2000 gtl I can't remember if the 2000 is a 4 pin mic, If it is the wiring will be 1 Sh/Red 2 White 3 Blue 4 Black ;Yellow not used.

cobra 2000 gtl ? Note: The pin numbers are marked on the end of plug.....#1.shield, #2.white, #3.red, #4.black.....that means #1.shield, #2.audio, #3.transmit, #4.recieve..........hope this helps.....

cobra 2000 gtl no tx finals are good you can put a radio next to it and you can see it try to key up so whats wrong with it? Make sure the wire that comes from the board to the SO239 or coax connector

mic wiring diagram fix recieve go to cb tricks

Wiring JCD-201M to the Kenwood TS-2000. Wiring JCD-201M to the Kenwood TS-2000.

...cobra 2000? what color wire goes to what pin on 5 pin cobra from a galaxy 5 pin desk echo mike? before you go thru all the trouble of wireing it ,what kind of radio did the desk mic come from.If it ...

...Cobra 2000 Gtl cb Radio Most likely, you have no 'voice' signal coming from the microphone. The MODulation control did not turn itself. Check for signal from the shielded or white wire from the ...