Questions & Answers for: clean ozone plate

Question about Living Air Classic Air Purifier

1 Answer

...Ozone plate didn't look dirty but did have a dark spot where contact touches plate. Replaced plate with new plate. Still no ozone. Took plate back out and turned unit on as directed in manuel, ...

Ad

Question about Living Air Classic Air Purifier

2 Answers

...plates and fans are both good. Thanks Mine has a switch lower right hand side that will stop the ozone. HI,I HAVE A LIVING AIR XL-15 S,SERVICE REQUIRED LIGHT IS ON,UNIT IS CLEAN ,BUT NO ...

Ad

Question about Living Air Classic Air Purifier

1 Answer

...plate, no ozone (O3) production. 2) Bad connection in the high voltage leads*. 3) Bad electrical components*. *I'm not an electrician, and recommend that only qualified personnel troubleshoot high ...

...clean the ozone plates? By using household products. How do you clean the ozone plates from an old Flaire machine. Hi lawrsports, I generally use household ammonia and an old toothbrush, rinsing ...

I cleaned my Ecoquest Flair and it runs but no ozone comes out. I have brand new plates on hand which I inserted but still no ozone so I'm guessing the plates I've been using are ok (no cracks). What ...

Question about Alpine Air Purifiers Eagle 5000 - 4000sqft Air Purifier

2 Answers

...ozone plates are dirty. Clean well with a brush and sudsy ammonia. If no arc, either the hv transformer is bad, the main circuit board is bad, or the ozone control is bad. There's one other thing you ...

...ozone plate. Unplug the unit and remove the rear air filter. Clean the filter with clean water and allow to COMPLETELY air dry. Removed the glass plate by depressing the lever behind the glass plate, ...

Question about XL-15 Air Purifier

1 Answer

ozone plate with warm water. Does this have anything to do with the bulb? I read on that we should clean the plate with l part amonia and 1 part warm water. We also lost instruction manual and can'

Question about Fresh Air Air Purifier

2 Answers

ozone smell. Just recently cleaned an all parts appear to be working,an lighting up. Did you clean the plate contacts with alcohol?  How old is the plate? Is the glue that holds the grid in place

...clean the air. What this does is make high voltage that jumps out into the air and attaches to particles in the air. Those particles are now attracted to anything with an opposite charge. In some ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Air Purifiers Experts

Brad Brown

Level 3 Expert

19187 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66977 Answers

David Kassin
David Kassin

Level 3 Expert

981 Answers

Are you an Air Purifiers Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...