Questions & Answers for: canon rebel focussing

only one auto focus point When composing a picture prior to opening the shutter, only one of the autofocus points is visible in the viewfinder and the camera is slow to focus, if it focusses at all. ...

...Canon Digital Rebel Xti. The 18- 55mm lens will not shoot on auto focus, but will on Manual focus. The camera shoots fine with my other lenses. I have cleaned the contact points of the lens with an ...

...canon digital rebel xti Take the lens off the camera and look through the lens. Is there anything obstructing the light? Now have a look inside the camera body. Same thing, anything there that looks ...

...Canon EOS Rebel G...i've had this camera for a few years, but haven't used it for a while. The camera has a capacitor to hold a charge for the shutter and the auto focussing modes. Usually when they ...

...Canon 350D with 18-55mm lens. I have used it for 2 yrs without any problem. But I noticed now that AF is not working properly. While pressing the half shutter during focussing though it is focussing ...

Have a brand new EOS 100D with Canon image Have a brand new EOS 1000D with Canon image stabiliser 18-55 lense that works perfectly. Have fitted my auto focus sigma zoom AF BII 55-200mm lense, and it ...

canon eos rebel from someone online and it has a 28-80 lens. I try to use it and i noticed the focus is very loose, is that normal? I dont know alot about cameras but i have used manual cameras before

...Canon Rebel T1i, the nine point focus lights do not come on all at once. I have tried adjusting per the manuel but that didn't help. The other option in the manual, to buy an additional part, is not ...

can the 550D eos take a picture without the lens? if yes, how? The lens is what focusses the image on the sensor. If you remove the lens, the sensor just receives a burst of unfocussed light.

my canon T3i wont focus with either lense? Most likely your camera is set to M manual focus. There's a little switch on the side of the camera that has S/C/M. The S is for single servo focus so it ...