Questions & Answers for: canister stuck Vacuums

Question about Featherlite Bagless Vacuum M085845Vacuum

1 Answer

stuck on The canister lid is stuck on to the canister and so I can't empty it out. Since it's pretty full, I can't keep vacuuming with it. Any ideas on how to open it? push it back in till you hear it

Ad

...release the canister. What am I doing wrong? Overtime the dirt canister can get somewhat stuck. Once you unclip it, you will need to apply some force and pull down. The dirt canister should

Ad

Question about Magic Blue 24195 Bagged Canister Vacuum

1 Answer

sounds like something is stuck in the vacuum but the hose is clear and the bag is new You might have a colg in the canister .

Question about Guardian Bagged Canister Vacuum

1 Answer

cord stuck all out Lift the front of the vacuum so the canister is at about a 75 degree angle. Gently tug and release cord. It may take a few tries, but it usually works.

Question about S3765-040 WindTunnel Bagless Canister Vacuum

1 Answer

...canister of my Hoover Wind Tunnel but I emptied and cleaned it well. It sounds right when I turn it on then it goes into this sound like something is stuck but there isn't anything stuck. The ...

canister it stuck I bet I have the same problem as you. My vacuums canister was put back together backwards and now will not move far enough to click unlocked. I am not sure how to fix this and I cant

...bag stuck in open position can not put lid down, stuck in the upright position on on the vacuum canister after putting new vacuum bag in. GoVaacuum2, I have the same problem and that didn't

Question about Epic 6500 Vacuum

1 Answer

...vacum hose Rag clogged & stuck midway in hose. Disconnect the hose from the canister and connect it to the blower end of the canister and this should blow out the debris or rag stuck in the

...canister button is stuck and I can't change out to a different canister for the dusting attachment Push down on the handle until you hear a snap. This should re lock the lift away. Now try it again. ...

Everything gets stuck in the hose Nothing goes into the canister Causing vacuum to overheat and shutdown Check for clogs in the hose and at the top of the canister.

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Manuals & User Guides

Loading...