Questions & Answers for: Honda Accord bumper removal

...the headlights in my 1998 Honda Accord, passenger side. Its not that hard but you have to remove bumper to get to the two bottom bolts that holds the headlights. First remove grille and there are

removal Bumper Cover. How do you remove a front bumper cover on a 91 honda accord? I need to remove and replace both headlight assembly. Its easy look at the bottom of the bumper has retainers and the

Front bumper cover is broken, no lights along bottom. I was pushed off the road and hit a curb in a 1993 Honda Accord. The front bumper is cracked and broken along the bottom right and the entire ...

How do you remove the front bumper cover on a 98 honda accord sedan EX Apply the parking brake and raise the vehicle and support it securely on jackstands. Disconnect the negative battery cable, then ...

...video will show you how to change the headlight in your Accord. You have to partially remove the bumper to get to 2 of the 10mm-head flange bolts. The bumper is held on by 4 bolts, accessible ...

...door accessible with the door open 2 on the bottom of the door behind the mud guard 2 behind the bumper cover, the headlight is attached to one of these. There is a screw holding the end of the ...

needany advice on replacing front bumper cover REPLACE FRONT BUMPER YOU SAFELY RAISE SUPPORT VECHICLE ON JACK STANDS.WORKING UNDERNEATH VECHICLE YOU DISCONNECT FOG LIGHT ELECTRICAL CONNECTIONS IF ...

...Behind the fender liner toward the front of the car you'll see some screws/clips holding the bumper to the front/bottom of the fender. You'll need to remove each turn signal in the front of

...removal To take front bumper off Yes, the bumper has to come off to remove the headlights. There will be a number of smaller screws around the outside of the bumper, like in the wheel well and under ...

How to remove 1996 accord fender Remove bumper only the side u need,bolts or plastics clips on top, two or three under the radiator support for bumper, remove head light, under the fender by the end ...