Questions & Answers for: brother xl 6562 parts

...XL-6562 - mine has done the same thing. There is a small black screw that requires an allen wrench to adjust. It is on the right hand side of the needle holder. Apparently it just works loose over ...

...Brother XL-6562 has sustained some damage (the smaller point broken, perhaps) -?- Long story short: the needle had fallen down into the machine; I removed the needle plate .. and upon leaning the ...

brother sewing machine model XL-6562.needle holder came off rod.n needle holder assembly fell off rod.need to know how to put back on rod. The needle holder has a screw right above the screw that ...

...Brother XL -6562. I don't need expert I can I need spare part for Brother XL-6562 I don't need expert I can replace the cover on a wheel. Have you tried contacting a Brother sewing machine dealer to ...

Brother XL 6562 sewing machine. Don't know anything about fixing it. Keep trying. If you still cannot get it back on, call a local sewing machine dealer to see if someone can look at it without having

...to the shaft ...this part won't stay on the shaft. Help Get a copy of the sewing machine manual at brother.com. Sounds like you need to tighten the screws, use a coin or screw ...

I have a brother xl6562 and the race is broken. I am having trouble finding a web site to order a new part. try sewingpartsonline.com or sewingmachineparts.net

...Brother XL-6562 back together? I took my machine apart to clean it out and figure out what was wrong with it. I did figure out what was wrong and fixed it, but as I was taking the machine apart a ...

...Brother XL 6562 YouTube The needle holder is usually held in the shaft that moves up and down with a set screw. This can be either a phillips, flat or allen type screw. If the set screw becomes loose ...

The thread guide by the needle has come off and the whole piece holding the needle won't stay on go to brothers website and look for your sewing machine see if atolls you if that part is replaceable