Questions & Answers for: beeping radio scanner turned

...scanner LOCKOUT REMOVAL I AM TRYING TO REMOVE ALL THE LOCKOUTS ON MY RADIO CHANNELS-HOW DO I REMOVE THEM? To remove the lockout from a channel, manually select the channel, then press Func + L/O. L/O ...

Radio Shack PRO-91 scanner keypad doesn't work The radio is scanning on frequencies that were previously programmed, and when the manual button is pressed, it beeps, the display clears, but the keypad

...scanner when you turn the squelch it should make a loud static noise but this one dont i hear the button key beep fine im just going to radio shack and return it for the only other one they have in ...

scanner works but keypad will not The keypad may be locked. Lock and Unlock procedure is below: To turn off the Keylock, press FUNC then . The scanner beeps 3 times and Key unlocked appears. To turn ...

My pro 82 keypad is locked. How do you unlock it? My pro 82 keypad is locked. How do you unlock it? To turn on the keylock, hold down key for about 3 seconds until the scanner beeps three times and ...

can't unlock channels. i push func + lockout but nothing happens To remove lockout on all channels, do the following: Press scan Turn on all banks that you want to clear lockout on. Press hold. Press ...

Is there a Master reset feature for the Uniden Bearcat BCT8 scanner? Need to reprogram and start from scratch. See nothing in the manual on how to perform this function. turn off scanner hold down the

turned on....says all channels locked out Hi, my name is John. Welcome to FixYa. Press and hold the L/O key until it beeps twice. Then press the SCAN button. enjoy. Thanks for choosing FixYa.....John ...

...When pressing any button on my scanner, it makes a loud beep noise. Im trying to find a way to turn it down or silence it. that is built into the features of the scanner and can not be turned ...

I turn on my pro -97 Handheld Scanner and it displays all channels are locked how do I unlock Turn the scanner on and make sure that you don't see a "key" in the display- if you do, you first have to ...