Questions & Answers for: avr 4800 protection mode

...AVR-4800 5.1Channel Standby light blinking Went to add another speaker to receiver and it sparked and now standby light is blinking and I cannot get system to turn on. It turns on for 5 seconds and ...

...AVR-487 SYS-57HT SPEAKER SYSTEM NO SOUND FROM MY SPEAKER SYSTEM. EVRYTHING ON THE RECEIVER SEEMS NORMAL. SUB WOOFER INDICATES IN A STANDBY MODE WITH NO DIGITIAL INPUT FROM MY RECEIVER. MY DOG CHEWED ...

AVR-4800 reciver and I added ablue ray player and I have connected for the sound optical , I had a dvd hooked up to it before for the sound via coxial which worked fine , by using this optical input I

avr go into protect mode when you power up your Hafler 4000 that is connected in the avr's pre-out, you must power up the set up in the correct sequence. 1. Turn off your avr 2. Connect Hafler 4000 to

How do you get a denon avr-2000 out of "protect" mode? How diid i get a denin avr 2000 out off protect mode?

...avr 4800 reciever that when powered up immediately shuts off and the red power led flashes rapidly, any ideas? Richard Determine how many times the led flashes, See if there is a way to reset the ...

...avr 4800, and eveytime I raise the volume to -21 or higher it goes into protection mode. can you help? my zipcode is 60184 ...

mode I setup the AVR X1000 and used it for about 3-4 hours. Next day, it started going into protect mode. I have unplugged all speaker/HDMI connections, reset the micro, but it still goes into protect

...AVR will automatically enter the Standby mode whenever no control buttons have been pressed and no audio signal has been present for 30 minutes. ...indicator glows solid white): When the AVR is on it ...

AVR 500. The volume flashing 20db then goes into Protect Mode. Question edited for clarity and full maker name. See the link. It is a known issue. https://www.google.com/search?q=Harman+Kardon+AVR+500