kitchen aid mixer The attachments are hitting the bowl - it seems like the motor/head is sprung..........leans too far down. We've tried to adjust the motor arm setting but can't find out what to ...
.................... She said it wobbles so much it took off some of the plastic coating of the paddle attachement because it got rubbed off from scraping the side of the bowl. Is there another thing ...
Kitchen aid 300 watt counter mixer model ksm90 The mixing attachment on on my kitchen aid mixer, when in use (rotating) mode the attachment swirls around touching the bottom of the mixing bowl ...
front attachment won't turn The front attachment, used for grain grinders, pasta makers, etc. has jammed and no longer turns. It sounds like one of the gears inside the head has failed. You will need ...
...attach the ice cream maker dasher and it won't go on because the bolt on the mixer behind the normal spindle is pushed out to one side...any suggestions?I tried tapping it back to the other side with ...
Question about Artisan Series Tilt-Head Stand Mixer
the mixer attachment is hitting the bottom of the bowl. how can I lift it up? It's difficult to answer without knowing what make or model.If I were to guess it is a KitchenAid tilt head model then ...
Question about KSM150PS Artisan Series Stand Mixer
...head of the mixer seems to dip to deep into the bowl. It is scraping the bottom and chipping the attachment. Hi, Put your mixers head in upright position and adjust the screw between the head and ...
...attach to the planetary. someone gave me this, so i'm thinking there is a part missing, although i'm unable to locate anything from the service manual. there is nothing to turn the attachments ...
Question about Artisan Series Tilt-Head Stand Mixer
The machine seems loose and it rocks. Also, the pasta attachment (meat grinder) will not lock in. Can I adjust where the grind worm goes in? Hello Darlenescott, About the machine rocks, the whole ...
Question about Artisan Series Tilt-Head Stand Mixer
the metal shaft that goes into the mixer head doesn't stay in the mixer head when you push it in - I can't see any way that it would be attaching itself inside the head google make ,model and manual
Usually answered in minutes!
493 Questions
357 Questions
324 Questions
285 Questions
205 Questions
