Questions & Answers for: Epson take apart for cleaning

...lens. Is there any way to clean or blow that dust out? Dave in Ft Myers You can take the projector apart and carefully clean the backside of the

...for the loss of suction and a service manual to help you pull it apart. Try the cleaning first though -> http://www.fixya.com/support/t138226-printer_not_printing Let me know how you get

...I CAN GET TO THEM EASIER WITHOUT BREAKING IT ALL UP. THANK-YOU GARY Review my previous posts on under head cleaning. Believe me, you do not want to take it apart to clean the heads.Previous posts ...

...apart instead of touching when I do an alignment test. Help? You need to start by cleaning the head from the underside. This rescue kit has a good cleaning guide as well as loads of other useful info ...

...apart and cleaned it very well ( it was very dirty) i clened with air pistol, also cleaned inside the printer( i think this is were i screwed up ) i put the whole thing back together, and for the 1st ...

...apart apear on all printed photos otherwise good prints Remove the cartridge and put it back in. If same issue persists, try to do head cleaning and nozzle checks simultaneously from the computer. ...

Epson Stylus Photo R260 I can't remove jammed paper the size of #10 envelope you will have take the machine total apart and clean the machine, clean the rollers, reset the machine rod

Green lines about 1 inch apart right across the picture green lines about 1" apart on photo's I'm using Epsom DX6050. have run a jet clean.

How do I clean the underside of the glass bed take it apart is only way, and it should not need to be cleaned

...cleaning fluid into the tube? Can I take it apart somehow. No info available online. The very last resort is to syringe fluid into the print heads, often that will damage the heads and require head ...