Questions & Answers for: 4x4 shifting lever

Question about 1988 Samurai

2 Answers

...move the 4x4 shifting lever to a point where nothing will engage, pull that shifter all the way down and then all the way up and to the left and you should be in 2 wheel

Ad

Question about 2002 Liberty

1 Answer

...4x4 lever into 4x4 low then drive a few feet. now shift main trans back to neutral then move 4x4 shifter back to 2wd high for normal driving then shift in drive and drive for a few min light should ...

Ad

...lever into 4x4 it dosn't engage the front axles Find the accuator on the front axle it has a two wire pigtail and threads into the axle housing. Check for power and ground if you have both when the ...

Question about 1999 Sierra

1 Answer

...4x4 lever goes in but 4x4 indicator light is not coming on and front wheels are not engaging.Worked fine untilI left work today and it would not work????? Check front axle actuator see if it came ...

Question about 1995 Grand Cherokee

1 Answer

shifting lever doesnt lock 95 jeep grand cherokee laredo 4x4 5.2 v8 automatic trans. when your shift into drive the lever moves freely between neutral and drive without applying brakes or pushing ...

...4x4 lever shift on a suzuki xl7. Is there anything to adjust the properly function most lever shifts cause problems every now and then basically the cables that change the transfer case into 4x4 get ...

Question about 2000 Ram 1500 Truck

2 Answers

...lever that shifts the transfer case had fallen off. I found the lever. My question is can I drive the truck as is till I can replace the lever? The the 4X4 indicator light is NOT ON. Can I drive

Question about 1991 Wrangler

1 Answer

the axle components, the vehicle has not released the front wheels. After shifting from 4x4 to 2x4, allow the vehicle to move without torque for a few seconds, allowing the components to move into 2x4

Question about 1998 Durango

1 Answer

...4x4 low and it wouldnt go there either, it was making some grinding noise when shifting, didnt have this problem last winter when i got the truck,seems real hard or stuck, anything you can help me ...

...4x4 with a lever, and 4x4 doesnt work you got problems with your transfer case or you got some bent or missing linkages. if you have a push button system for 4x4, then you could have a number of ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...