At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
First, are you sure you have network capability. This is an option. Since there is no control panel display on this printer, you'll have to use the configuration software provided by Tally Genicom.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
This is a corrupt data error, cold reset your printer or reinstall Firmware chip from formattor board. If you do a cold reset it will put all settings back to factory settings. Networked printers should make sure they have there IP address written down to reset back to original address. USB connections, this won't be a problem.
If the printer already has an IP address and you know what it is by printing a config page, the simplest thing to do is connect a pc directly to the printer using a cross over network cable.
Ensure the IP address in the PC is in the same range as the printer ie only the fourth octet is different.
Ensure you can PING the printer
Enter the current IP address of the 9022 in a web browser and it should take you to the printers internal web page whic will allow you to change network settings.
An alternative option is to use the ARP command at the DOS prompt, for this you will need the MAC for the network card on the printer, this will be on the printed network config page and on a lable on the network card.
For help on the ARP command type;
ARP /?
At the DOS command propt on a PC.
A third option is to use a software utility called SYNCTHRU supplied on the installation CD that was with the network card when new.
Your driver is not sending color data. Either your driver is set to print in geayscale, or you are printing through a monochrome driver to the IP address of the CP 2025
When you use the keys and LED panel on the printer, does it display an IP-address that starts with '192.168' ??? If so, the printer is correctly connected to the router.
Access Control Panel
Access Printers
Click Add A Printer
Choose Network Printer
Browse your "home-network" to find the printer.
×