I have a Sharp Carousel Mircrowave. Model R-410LK Serial: 65061 and i broke the carousel plate. I need a replacement plate. How do i get one.

You may have a defective turntable motor, a defective turntable motor coupler, or a defective turntable roller assembly.

You can find helpful Parts diagrams and order Sharp parts from Sears here:

http://goo.gl/zWz6Bz

I really doubt that you can even get parts.

manual can be download from several websites, just type in your search window like Google: Sharp #Model + "service manual download PDF" into the search field.

https://www.manualslib.com/manual/151473/Sharp-Carousel-R-9h76.html#product-Carousel%20R-9H84B

or,
https://www.manualslib.com/products/Sharp-Carousel-R-9h76-349741.html

or,
https://www.manualslib.com/brand/sharp/microwave-oven.html

You can download the owner's manual from my site here at no charge.

We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

Sears Parts Direct has the parts diagrams and many parts for the R-1505 microwave. The glass plate is part 4-3 ($33.99) on this page: http://www.searspartsdirect.com/partsdirect/part-model/Sharp-Parts/Microwave-Parts/Model-R1505/0958/0123370/50019999/00001?blt=06&prst=&shdMod= .


Without more tests, I can't be completely positive but the turntable motor is the likely problem. That is part 1-4 on the list above. However, it could be a wiring problem with the wiring to the turntable motor.

Partstore.com has many of the parts as well: http://www.partstore.com/Model/Sharp/Sharp/R1505.aspx .

I hope this helps.

Cindy Wells

yes you can bake cookies in the carousel on BAKE I suggest those new rubber looking bake plates help a lot to reduce the moisture that makes them soft.

I think they are silicone rather than rubber, i am sure you know the ones I mean

Thanks for using FIXYA

i just checked my R-3A36 manual to find out the wattage. it's 800 watts. i make pralines in my microwave. i am always asked for the recipe. so i needed to be able to tell people the wattage of my oven so they can adjust the recipe to their oven.
garry, metairie,la.

Hi George,

I ahve the same issue. Did you manage to repair it or did you need replacement?

If repaired then how?
if replaced then where did you manage to get the part from?
Regards
Vipin

You probably have a defective magnetron or blown fuse supply power to magnetron.

The tray is Sharp part # NTNT-A011WRF0 or NTNT-A034WRE0. (Same part, just different numbers).

Here's the link to where you can find it...
www.microwaveglasstrays.com