At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
I am looking for a schematic for my Zenith vcr/plus. we checked the fuss and it looks ok. we can not get the vcr to come on. we also had to retreve a vcr tape out of the deck . we found out from zenith that they will not sell the schematic to the public for them to fix there own .
I am looking for a schematic for my Zenith vcr/plus. we checked the fuss and it looks ok. we can not get the vcr to come on. we also had to retreve a vcr tape out of the deck . we found out from zenith that they will not sell the schematic to the public for them to fix there own .
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
please refer to this picture: http://www.retrevo.com/r/375bh427/3/Connections+for+your+VCR#q=Zenith+VRB4215
Rather than use the method in the picture above you should use the audio L+R and video OUT on your VCR and connect these three to the color matching audio IN and video IN ports on your television. The colors are red, and white for audio and yellow for the video. If you do not own a cable like this simply pick one up at radio shack they will know exactly what you need. The pictured method will work also but the picture and sound quality will not be the best possible.
Remember you are sending data OUT from the VCR and IN to the TV
Try holding down the tv power button and keep holding it while you press the channel button until your tv comes in.. It takes a few pushes. Make sure your tv is off first though.
Sounds like the video heads are worn and time to replace them. You can try Asti Magnetics. The part number you are looking for is "378". Sells for $55 plus shipping. A bit cheaper but quality parts. I've dealt with them in the past. You can decide if the VCR is worth it to repair.
We lost the chat communication.
check this LINK to download your schematic diagram. Make sure you get all the 7 parts before you can open it.
You will need winrar and acrobat reading 6.0 or newer to view the schematic.
Good Luck.
Yes coming in her VCR with Cable or ant, if she has satellite it would be different. Going out to tv from VCR. Then in is Input the Out is Output. RF cable connection or A/V inputs(jacks) either one same way of hookup.
I am looking for a schematic for my Zenith vcr/plus. we checked the fuss and it looks ok. we can not get the vcr to come on. we also had to retreve a vcr tape out of the deck . we found out from zenith that they will not sell the schematic to the public for them to fix there own .
like i said before we did there web site and could not find one for my vcr.
×