I received an error code 0X490 in the system files integrity check and repair. What is this and how do I fix it?

When we will install windows 10 then error code 0*c0000001 will keep popping.
The causes of error code may be
1. Damaged SAM file
2. Damaged system files
3. File system integrity compromised
4. Damaged RAM

Here is method that will help to fix error code
Use Media Creation Tool to Perform Automatic Repair

Automatic Repair is a Windows feature that allows you to fix certain system problems preventing you from installing or starting Windows. It works by scanning your computer system for any potential problem and tries to fix it.
Step 1: Download the Media Creation Tool
Step 2: Boot your computer using the Windows 10 DVD, or the System Repair disc. When you're asked to press any key to boot, just press any key on your keyboard.
Step 3: Choose the right time and the keyboard type.
Step 4: Click Repair your computer. You'll see this at the lower left corner on your screen.
Step 5: Choose Troubleshoot from Choose an option screen
Step 6: Click advanced options
Step 7: Choose automatic repair

https://answers.microsoft.com/en-us/msoffice/forum/msoffice_install-mso_windows8-mso_2013_release/error-code-30089-13/93a41c3a-1edc-4f6b-a80b-b6a23b51bcb9


Error Code 30089 13

You are going to need a clean boot up disk. You will have to get one mailed to you or you will have to use another computer to download one. This will get you back into a point that you can do a windows restore. This is going to get rid of all programs and start you fresh. I do, however, feel that you disk drive is going out or already shot. You should do a Chkdsk on it. (check disk). This will tell you if it is a hard drive error or not.

system recovery, F11, or F12. you will lose all personal data

I think your windows boot configuration file is corrupted. May there are some bad sectors or else. What to do is use UBCD or Hiren BootCD and boot it offline and check the HARD disk using hard disk repair tools in any of those two.

i suggest getting/borrowing usb cd/dvd drive and then reinstalling your OS

Did you do anything prior this error message? Create a new partition, etc??? I need to know exactly what you were last doing before this began to occur.

Ryan Frame
Creative Energy Associates Technical Center

from that error, it is likely one of 2 things. Either the bootloader is corrupted, which you can try to repair with the following tools:

http://neosmart.net/wiki/display/EBCD/Recovering+the+Vista+Bootloader+from+the+DVD

Worst case for a software error, clean install of Windows to resolve.

Or the hard drive is having a hardware failure and it is effecting the boot sector of the HDD. If it is a HW failure, you may be able to run diags to see if a fault is found. If the drive is bad, it will need to be replaced

You basically are having BSOD = Blue screens of death of the boot manager and causes your computer to crash and not log into the OS, I would recommend you do a DFT , Drive Fitness Test on the computer, you can download it from google and burn it to a cd and boot off of it and test your Hard Drive. Most likely you have a bad hard drive or bad sectors and these damaged sectors could have been system files that vista needs to boot into and since it can no longer access / find them you wont be able to log on. If you replace the Hard Drive and reinstall using your system Disks/ restore cd's you should be golden and up and running. If you dont have the disks you can call the computer manufacturer and they should be able to supply you a copy for a small charge. Hope my answer gets you closer to a solution. Please Help rate me if I helped you out or not I am new but a very good tech.

formattt that hard drive sound like bad secters in hd run xp dish cheak chdisk u know to fix those bad secters on hd froma bug or sumthign best best u have orginal xp cd not recovery dish operting system disk boot into that del partions make new one then formatt it then install xp fresh update it so on ok