Faxes are incomplete or non-existent for Panasonic KX-FPC166

Make sure there is no additional error messages on the screen - they usually show in a sequence one after another - maybe paper not loaded correctly,or machine is jammed or out of thermal film.

The KX-FM131BX, KX-FM131CX and KX-FM131AL do not connect directly to a computer. They only have RJ-11 connections (to the phone line (line in) for all models and to another phone or answering machine (in some cases).

To send and receive faxes with a computer, you need some sort of USB or network port on the machine. Brother has some that may fit your needs: http://www.brother-usa.com/Fax/ModelDetail/2/FAX2840/Overview is one of their lower end models.

I hope this helps.

Cindy Wells

when msg is displaying on screen fax in memory .install paper and press fax start key.all faxes in memory will bi print.by mian jee

Open the document feeder and look for a switch actuator stuck in the down position.

WE WERE SETTING FOR TELEPHONE INSTEAD OF FAX ONLY. OUR MISTAKE IN THE SETTING.

THANKS ANYWAY, JACK D. STEPP

Jamming problem in Fax machine model no KX-FT 931

you have to set machine for fax mode by pressing auto answer button on key pad of machine. then you have received faxes automatically.

check to see if your phone line is plugged in the " L" or line slot on your fax machine if it is then press the speaker or monitor key and listen for dial tone. then you put a document into the feeder and dial your cell phone number and press send, when your cell phone rings answer and listen if you are getting a high pitched squeel. if you are then it should be working. try it the other way too by dialing from your cell and listen again for the squeel. if you still don't get the squeel you have a defective modem.

Thank You,

Mikey

Thank You,

Mikey

turn off overseas mode

THE PHONE SEEMS TO BE GETING DISTORTED ,IT MAY BE IN THE PATH OF THES DIGITAL BOXES. PLS CHANGE THE LINE OR LOACTION HAPPY FAXING OMNIPRESENT