We have been given the PC game V8 Challenge, but am unable to install the game. It installs to 88% then says: "Data Error (cyclic redundancy check)". Please can you advise as to how we get thte game installed. Thank you. Campbell

your disc is probably damaged...

the cd may be damage or the reader is faulty.
the file may be corrupted

from my experience, a cyclic redundancy check error is a problem on the instal disc. You need to return the disc to the supplier for exchange.

Cyclic Redundancy Error comes when the source device like a computer calculates data and add the size of the information and sends it to the destination device. The destination device sees the size of the information and recalculate the size of the information and compare the two if they do not match the cyclic redundancy problem is reported because the information data has gone corrupt during the transit from the source to destination device. It can be a wrong configuration or packet collision. If it is due to packet collision the error can be over come by resending data multiple times.

Your disc is scratched. That error will come up when it happens. Try to clean your disc. get all the fingerprints off of it.

Try cleaning the disc first. There may be dirt or fingerprints interfering with reading it. The CRC error means the data is not being read correctly. If the error continues and this is a game you recently purchased, I would recommend returning it to the store and exchanging it as it's probably a defective disc. If you are trying to install a copy you downloaded you should try downloading again as there is some error in the data.

Hi,
Please check with the another disk if the same issue is coming with different disks this is a ODD issue otherwise the disk is faulty as cyclic redundancy means the data could not red from the sector of the disk.
Thanks

Either the disk is damaged or the optical drive is going bad.

you have a .dll file error coming from your pc........so you have to correct those errors on your pc.

Trying Downloading Quick Install for the WUSB300N from
www.linksys.com