20 Most Recent Linksys WUSB300N Wireless Adapter Questions & Answers


How did you post this question? If on someon else computer, download the driver on it to a usb drive and use that to install on your machine.

Linksys WUSB300N... | Answered on Aug 29, 2011


Hello,

What operating system are you using?

Here is a link to the site with info and drivers are on the right of the page.

http://www.linksysbycisco.com/UK/en/products/WUSB300N

If my answered help give me four thumbs as thanks!!

Linksys WUSB300N... | Answered on Aug 29, 2011


the reason it does that is because your pc is attempting to boot from usb there is a way to solve that issue without having to disconnect the wusb and here is how...restart your pc as soon as it comes on enter the bios setup by pressing the button it tells you to usally esc or f1 f2 or 10 once you enter the bios setup search for the boot section and disable boot from usb or move it down on the order which should be set to number 1 cd/dvd number 2 hard disk and so on.. then after you have completed this save and exit it then should reboot and have no problems with the wusb

Linksys WUSB300N... | Answered on Feb 11, 2011


There might be several reasons for the performance to go down. Three main things which usually contributes to your PC performance is Size of the RAM larger it is faster it will be. Processor speed more it is shows better performance finally free space on the hard drive (Very Important) it can be compared to a person carry 10 pounds can run faster than person carrying 100 pounds. Less the free space worst the performance.

Having said that i would suggest you to follow some steps suggested in the link below,

http://www.fixya.com/support/r6910202-speed_up_pc

I hope it helps....good luck

Linksys WUSB300N... | Answered on Feb 05, 2011


do u mean every since u installed the adapter ur computer has been crashing if so then its either bad or u need to reinstall the driver for it

Linksys WUSB300N... | Answered on Jan 30, 2011


go to Linksys.

If you need more help come back.

Post / thumbs / testimonial are welcome!

Linksys WUSB300N... | Answered on Jan 04, 2011


Hi Sir/Madam;

Here is the source link to download the driver/software for your Linksys -WUSB300 N wireless adapter.

Click here :Linksys


Thank you for using Fixya.

Linksys WUSB300N... | Answered on Dec 10, 2010


Assuming you are using mirosoft windows, open the control, open "add or Remove Programs" select the linksys software, and click on remove. Then restart the computer.

Linksys WUSB300N... | Answered on Oct 24, 2010


Try using a different channel, move your antenna's around keeping in mind reflective and blocking walls/metal shelves/trees/etc. You may have a great signal but there are many other issues that can plague a wireless signal while it still shows strong from your adapter/driver.

Use one of the war driving or basic spectrum analyzers to try to determine which channels are least congested in your area.

Linksys WUSB300N... | Answered on Sep 25, 2010


Hi Daniel,

Hope you will get enough information through the following link;
http://www.newegg.com/Product/Product.aspx?Item=N82E16833124093

Regards,

Anirban Mazumdar

Linksys WUSB300N... | Answered on Jun 05, 2010


Have you installed the appropriate drivers? Okay here you go: goto www.linksys.com
search for the drivers and see whether this device is compatible with windows 7. When you find the drivers download and install them.
I hoped that you did not install any drivers for this device previously and if you even did install first uninstall those drivers and then re-install the freshly downloaded drivers.
Hope this works!

Linksys WUSB300N... | Answered on Mar 23, 2010


download-laptop-drivers.com/free-driver-for-wipro-wivnb7b1620/

Linksys WUSB300N... | Answered on Mar 14, 2010


what is the error message that appears when you open ie8???

Linksys WUSB300N... | Answered on Feb 10, 2010


Hi

to download the drivers for WUSB300N click on the following link

http://www.linksysbycisco.com/US/en/support/WUSB300N

take care
Tx.

Linksys WUSB300N... | Answered on Jan 25, 2010


Try to update the driver of your adapter or try installing it on another computer.

Linksys WUSB300N... | Answered on Nov 04, 2009


try refreshing your slushy machine over easy on a biscuit

Linksys WUSB300N... | Answered on Sep 20, 2009


  • hard wire the laptop to the router, which reestablishes the connection.
  • set the connection to be wireless
  • follow the prompts and you will soon be wireless again

Linksys WUSB300N... | Answered on Sep 14, 2009


no we cannot use wireless networking in india sir.we can only do it in other rich countries.pls visit www.keralachat.pico.com

Linksys WUSB300N... | Answered on Jul 25, 2009


That would be correct. If it is USB attached and not PCI (internet/ethernet card)
I would try updating drivers for the linksys and then reinstall the software and manually set configuration

Linksys WUSB300N... | Answered on Jul 02, 2009


Connection and signal strength depends upon the router. Just go through the settings on the wireless router, try changing the wireless channels.And also change the wireless mode on the router to 802.11g.This should be the compatible mode for your wireless adapter. to do this first connect the router with the help of an ethernet cable .Please follow the below steps:
1)Using your Internet browser, you can access the Router’s Web-Based
Advanced User Interface. In your browser, type “192.168.2.1” (you do
not need to type in anything else such as “http://” or “www”). Then
press the “Enter” key.
2)
You will see the Router’s home page in your browser window. The
home page is visible to any user who wants to see it. To make any
changes to the Router’s settings, you have to log in. Clicking the
“Login” button or clicking on any one of the links on the home page
will take you to the login screen. The Router ships with no password
entered. In the login screen, leave the password blank and click the
“Submit” button to log in.
3)
Clicking on the header of the “Wireless” tab will take you to the
“Wireless” header page. From this page, the Router’s wireless radio
can be enabled or disabled (the default setting is enabled). Under the
“Wireless” tab, there are links that allow you to make changes to the
wireless network settings.
4)
Your Router can operate in three different wireless modes:
“g and b”, “g only”, and “b only”.
5)
Change the wireless channel to 9 or 11
Click on save changes once you have done this
This should work,if it doesnt work let us know the exact problem in detail.

Linksys WUSB300N... | Answered on May 18, 2009

Not finding what you are looking for?
Linksys WUSB300N Wireless Adapter Logo

54 questions posted

Ask a Question

Usually answered in minutes!

Top Linksys Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2277 Answers

Ekse

Level 3 Expert

13434 Answers

Mike

Level 3 Expert

4369 Answers

Are you a Linksys Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Linksys Computers & Internet

  • Linksys Computers & Internet

Most Popular Question

when wusb300n plugged in computer

  • Computers & Internet
Loading...