Dish remote won,t work if Visio E550Vl is in operation.

Visio is made by Emerson. http://www.shopjimmy.com/vizio-3655-0152-0150-main-board-for-e550vl.htm

Use the RECOVER button to get back to watching satelliteprogramming if you accidentally change channels or inputs on your TV. Press POUND. Press & hold the TV Mode button until all Mode buttons light up. To take the remote out of Limited Mode, use the PAGE DOWN button instead of the PAGE UP button in step 2.


to download the User Guide - Dish Network

www.dish.com/downloads/tv.../2-Way_RC_UserGuide.pdf Dish Network
Feedback

Program Remote to TV/Other ' MyDISH ' DISH Customer ...

https://www.mydish.com/support/program-remote-to-tv

Fault to its main board. Short circuited component/s at it. Contact any service technician; or the authorized service center. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts. http://electronicshelponline.blogspot.com/ . In most cases, the main board might have to be replaced. If so, a software [firmware] update too might be necessary.

inverter fault. check board for blown capacitors . if no signs off blown parts check with a working inverter board.

A remote for a dish,Will not work on home audio (Equipment)

Just call dish they will be more than happy to assist you programing your remote

On the vizio remote go to menu then picture then click the more button then advanced pic then turn off ambient light sensor and bscklight control. I also had to play around with the backlight #

ronwright22

I have provided a link for you to Vizio's Website. The information below is for a VSB210WS sound bar. I would go to this link and research your model number and look for the code. You may try the code on this screen to see if it will work. I have also provided a link with instructions on programming your DISH remote to other components.

Vizio Website:

http://www.vizio.com/vsb210ws.html
This is the VSB210WS sound bar.

Programming a Universal Remote to operate the HD Sound Bar System If you own a VIZIO TV with a Universal Remote that uses a 5-digit programming code, you may program a device button with code 31517. This will map the Universal Remote button to operate the HD Sound Bar System as follows: Pictured at right is the VIZIO VUR8P Universal Learning remote.

Ray Calo
DISH Network

Direct Dish.... :p only outputs to your TV on channel 3 or 4. This leads to only using Direct's remote. I would suggest to try going over to DISH Network as their remote is much better and will work the TV......

I bought a 42" Visio LCD from Costco and used code 10030 and it worked. It is the code for Goldstar TV.