Question about Maytag 24 in. MDB9750AW Dishwasher

1 Answer

I have a Maytag Quiet Series 300 dishwasher that won't start. There is power going to the unit, but the control planner was not function. please help.

Posted by Anonymous on

Ad

1 Answer

kenbm

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 11 Answers

I had no lights on my control panel, eventhough power was good.
I replaced the control panel ($265 part), it worked for 2 weeks, then I now have the same problem.
Frustrated, I am probably going to buy new from a different manufacturer.
Whirlpool/maytag does not warranty electronic parts if you do it yourself.

Posted on Feb 09, 2011

  • lewistellado Apr 18, 2011

    I'm having somewhat of the same problem. Only difference is that all the lights will illuminate and so when I select how I want the cycle to run, I go to hit the start button...... and nothing happens. I just may purchase an control panel and roll the dice. Still, it baffles me that everything works but the start button. Does not compute.

  • kenbm Apr 19, 2011

    Brace yourself as Maytag Whirlpool will not stand behind their products. I purchased the replacement component and it worked for two weeks, then stopped working. Maytag would not warranty the component, nor did they offer a solution.
    I am now the proud owner of a Bosch dishwasher and will never buy a Maytag/Whirlpool/Jenn Air etc. appliance again!

×

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Maytag Quiet series broken?


Check the door switch.

May 03, 2013 | Dishwashers

1 Answer

My dishwasher the maytag quiet series 300, will not respond to the start button


Find your circuit breaker for your dishwasher and turn it off for 3-5 minutes. Turn it back on, then turn on your dishwasher. If this works, after the complete cycle of your dishwasher, you have to turn it off manually by pressing "on" botton then press it 1 more time to cancel; this will turn off. The defect is, probably the moisture built up in the control board causing it to ground some of the connections. Suggestion for the manufacturer, insulate the control board to prevent absorbing moisture.

Jan 04, 2013 | Maytag Dishwashers

3 Answers

The latch is sticking on my dishwasher. How can I


replace the door latch and the handle check to see if the console loops that hold the latch are broken if so replace the console

Jun 02, 2010 | Maytag 24 in. MDB9750AW Dishwasher

3 Answers

1.5 year old Maytag Legacy Series Quiet Series 300 Lock Light on


Hold down the heated-dry button for 3 seconds and the light will clear.

Nov 07, 2009 | Maytag 24 in. MDB9750AW Dishwasher

2 Answers

Maytag Quiet Series 300 Dishwasher will not turn off after it com


MY DISHWASHER KEEPS RUNNING, IT IS A WHIRLPOOL GOLD QUIET PARTNER IV

Apr 05, 2009 | Dishwashers

2 Answers

Maytag quiet series 300


Maytag Quiet Series 300. The lights flash in sequence starting from the outside traveling inward. The timer counts backwards from 50 to 1. Then the sequence starts over. and continues over and over. I'm able to clear it when the time reaches 1 or 2. It stays off for a while (3-4 hours) then starts over. I can not clear the countdown until it reaches 1 or 2. After I clear it the dishwasher will work, but until then, no way. This happens with the door open or closed.

Sep 15, 2008 | KitchenAid 24 in. KUDI02IRBS Stainless...

2 Answers

I have a maytag quiet series 300. When it is done with any of the cycles in leaves about 1-2 inches of water in the bottom of the dishwasher. I can manually hit the start button twice and it will go...


Hi jeffwirch,

I'm Harvey the Master Plumber.

Your problem is: You have a maytag quiet series 300. When it is done with any of the cycles in leaves about 1-2 inches of water in the bottom of the dishwasher. You can manually hit the start button twice and it will go through a 2 minute cycle and pump out the water. You have cleaned the filter inside the dishwasher where it drains and have checked the hose to the disposal and it pumps out fine. It just doen't pump itself at the end of the cycle.

It sounds like a bad control board. It's in the top of the door panel. I don't recomend this repair to the average homeowner. You might consider the Repair Directory to find a repairman.

Feel free contact me again!
Please give me a rating here at fixya.com before you sign off
Thank you,
Harvey your Master Plumber

Sep 13, 2008 | Maytag Dishwashers

Not finding what you are looking for?
Maytag 24 in. MDB9750AW Dishwasher Logo

1,571 people viewed this question

Ask a Question

Usually answered in minutes!

Top Maytag Dishwashers Experts

Michael Thomas
Michael Thomas

Level 3 Expert

3053 Answers

Mike

Level 3 Expert

4369 Answers

Marvin
Marvin

Level 3 Expert

85239 Answers

Are you a Maytag Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...