Usb cord won't fit all of a sudden

You can turn off the Mp4 for a while and re-install the system ,and then you can change if the port is fit the computer ,you can also used a transfer interface to connected the computer .

You have reached the end life of the battery pack. The battery must have some minimum charge to have computer function even with the AC power pack connected. So I suggest you replace the battery pack as a solution. Any local Radio Shack store can test this battery I am told free of charge.

Consider NOT using the USB connection.


The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or connected via USB or FireWire). This is likely to be faster than connecting the camera to the computer, and won't run down your camera's batteries.


Once the card is plugged in, it will appear to your computer as a removable drive. You can use the operating system's drag&drop facility to copy pictures from the card to the computer's hard drive, the same way you copy any other files. Or you can use any photo cataloging program such as Picasa.

No, it won't. You need to use the included battery charger. If you need a new one, you can find a replacement at bestbatt.com

Hello and Welcome to FixYa!
Yes, it has been seed that other similar model cables doesn't work properly due to minor changes in their structure, although he connectors are same but I'll recommend you to get the original cable for your cam.
The inappropriate cable may end up in some other loss.
I hope you understand.
If you have any Confusion, questions or issues regarding your problem do tell me.
Thank you for using FixYa!, Keep visiting..

If you think I was of help, your token of appreciation in the form of rating and a testimonial will be esteemed.
Concerned, Nooh: FixYa Team.

Consider NOT using the USB cord.

The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or connected via USB or FireWire). This is likely to be faster than connecting the camera to the computer, and won't run down your camera's batteries.

Once the card is plugged in, it will appear to your computer as a removable drive. You can use the operating system's drag&drop facility to copy pictures from the card to the computer's hard drive, the same way you copy any other files. Or you can use any photo cataloging program, such as Picasa ( http://picasa.google.com ).

Remove all the data from Itouch, takes about an hour. then reload using itunes. now all work fine together!

better u change your battery and try....

You might want to try a differnt cord. I use the one that came with my camera because it is a lot thicker.

Why not simply try charging it up, I assume it came with a charger? Other than that I do not know