Can't get on the internet

Try connecting to the Internet through the ethernet port (via a cable). If Internet Explorer loads the target page then you have a configuration problem with WI-Fi access : The wireless security settings are not allowing the computer to access the Internet.
If Internet Explorer does not connect with the cable then the problem resides with Internet Explorer. Try to reset the defaults. To confirm that download FireFox and use it. Besides you need two browsers just in case one acts up.

why dont you try to disconnect from the network then reconnect it will reset the wireless connection and give you a better signal

you mean like a wireless usb modem. well, your internet settings must have been altered during the update. confirm that you are having the right APN settings in your modems application. (you could post here the brand for further assistance.) also, check that from the internet explorer tools, connection settings, choose automatically get settings.
Regards

Open Internet Explorer, go to TOOLS drop down menu, pick INTERNET OPTIONS, click on the CONNECTIONS tab, and click the radio button NEVER DIAL A CONNECTION. Then close IE and restart it. I hope this helps and good luck. Please vote appropriately and leave a comment.

You need to set up a new log in code

it looks like wireless card in the laptops need to be changed.

Don .bin is a firmware that can upload to the linksys router or any router.

So it seems that your unable to connect wirelessly using the linksys adapter? The Internet connection before is working properly?

*I might advise you to reinstall the driver of your wireless adapter using the latest driver that you can download in there support site.

- Check the Internet connection hardwired to the router if connection works it seems that problem is on the adapter.

Verified that the Internet connection is working good

- Now if your connected to the wireless network but unable to access a website try this:

- Open the control panel
- Open the network connection
- Right click on wireless networks (Choose properties)
- Choose Internet protocol then click properties
- Assign DNS Server address (Preferred DNS: 4.2.2.2, Alternate DNS: 4.2.2.3)
- Leave the DCHP as obtain IP address

I would scan the computer for viruses.

my phone dont want to connect to intrnet