Coby MPC7095 won't connect to PC

Install the software compatible with the mp3 player . Some computer acess the device only when the suitable sofware is installed.

it am very sorry

I had the same problems with my player i took it apart and there was a little chip connected to the battery terminal wires, i removed the little black chip which is a sensor for the batteries to prevent damage to the unit and I removed it and resoldered the wires the battery terminals and now it works perfect.

Try to format it from your computer the same way that you would if you were formating a floppy disk

i dont believe so :o

plug your usb to your computer and try to see if your computer can detect it.
then you can try and reset it again.

good luck

Hmm... I'm not sure if this will work but it did when mine wouldn't work. Just go to settings at the bottom and choose usb mode and select mpc, that should solve your problem

I changed the settings in system tools >USB settings to MCS mode and then you can access all lthe files on your coby player through your PC and move them into the appropriate folder. It seems all your music has to go into the music folder. The Coby player isn't the most user friendly and is buggy. If they fix the programming, it would be a good competitor to ipod.

it dont play my ******* song

WHILE MY COBY MPC 7095 IS CONNECTED TO THE COMPUTER IT COMES ON BUT EVEN AFTER THE FOUR CHARGE ONCE DISCONNECTED FROM THE COMPUTER IT WILL NOT TURN ON PLEASE HELP.