An extension user guide for analogue and digital handsets for a Samsung 7200 phone system.

If an extension light on your Samsung OfficeServ DS-5038S phone is flashing red and dialing the extension gives an engaged tone even though no one is using the phone, it's possible that the extension is stuck in a busy or engaged state. Here are some steps you can try to resolve the issue:

1. Check the extension: Go to the extension in question and make sure the handset is on the hook and that there are no other phones or devices using the line.
2. Restart the phone: Try restarting the phone by unplugging it from the power source for a few seconds, then plugging it back in.
3. Check the programming: It's possible that there is an issue with the phone's programming. Check the phone's user manual or contact your phone system administrator to ensure that the extension is programmed correctly.
4. Check the phone system: If the issue persists, it may be necessary to check the phone system itself for any issues that could be causing the extension to appear busy or engaged.
5. Replace the phone: If none of the above steps resolve the issue, it's possible that there is a hardware issue with the phone itself. Consider replacing the phone or contacting a qualified technician for further assistance.

It's important to note that some phone systems are configured to automatically put extensions into a busy or engaged state after a certain period of time to prevent unauthorized access. If this is the case, contact your phone system administrator to adjust the settings accordingly.

To Program:
Lift handset. Press * 3 0 , then enter the desired 2-digit code (00-09), enter the line access code (generally “9”) followed by the telephone number, then #.

To Use:
Lift handset. Press AUTO DIAL/STORE * plus the 2-digit code (00-09).

To Use System speed Dial:
Lift handset. Press AUTO DIAL/STORE plus 3-digit (000 - 999)


The User Guide can be found at the link below. Hopefully this helps.

http://www.manualslib.com/manual/853264/Panasonic-Kx-Dt333.html

Place the handset on the base. See "Add and register a handset" on page 23 of the manual: Owners Manual User Guide for Vtech 2 handset cordless phone system caller...

Best to visit this page to find the manual you are after.

http://www.uniden.com/telephones/dect-60-cordless-digital-answering-system-with-caller-id-expandable-up-to-6-handsets/invt/dect1580g

http://www.uniden.com/accessory-handset+charger-for-dect1500-dect-60-cordless-phone-series/invt/dcx150g

AT 2375 2 4GHz Multi Handset Phone with CID CW Answerer QVC com

http://www.qvc.com/AT%26T-2375-24GHz-Multi-Handset-Phone-with-CIDCWAnswerer.product.E135166.html

Possible to sign in and ask a question to the Community.

Found the User Guide for the B7330. I think this is essentially the same handset.

B7330 User Guide

Hi,

To turn off voice mail please dial ##002#, this would do the trick.

Regards

In program no (620) enter all the extension nos which you want to ring in group 1. Then in program no (450) enter the floating no of group 1. You will get the floating no in program no (623).

The user guide for this Handset can be found at this link:http://www.wireless.att.com/support_static_files/manuals/SYNC.pdf