Porter cable router parts list - Porter Cable 75182 Variable Speed Router Motor

Go to http://servicenet.portercable.com/ and put in your zip code and call the closest "Factory" service center and ask them to look on the back of the parts list. There's usually a wiring diagram on the back of the parts list.

Porter Cable

A 1 year old router...that suddenly stops working. My suspicions would be brushes first then the switch.

There are 3 different types of this router Type 1, 2, and 3.

Parts can be found here:
http://www.ereplacementparts.com/porter-cable-7529-type-plunge-router-parts-c-129_1672_1985.html

Brush is item 3 and switch is item 4.

pdf of diagram: http://www.ereplacementparts.com/images/Porter_Cable/7529_TYPE_1.pdf

Thanks for choosing FixYa,
Kelly



Thanks for choosing FixYa,
Kelly

Could not find parts listing for your nailer. It must be an old number from Harbor Freight. Thier nailers however are China copies or popular brands. Take the part that you need to a fastener company that deals in popular brands of nailers and with measureing tool in hand, ask them to try to match. I have had luck with some porter cable parts fitting central guns. Look here:
www.toolpartsdirect.com

find a porter cable fr350 nailer parts list or bostitch n80. It they look similar then parts for porter cable are sold thru Dewalt service center (for actually looking and measuring the part) .

The manual for your porter cable CPL6025 can be found here.http://www.managemylife.com/mmh/owner_manuals/15600/PORTER-CABLE-Air-compressor-L0305483

The motor is part # 3092 and the base is model 3091. When you put the two together it becomes a model 309. A parts list is here. http://www.ereplacementparts.com/porter-cable-3092-type-laminate-trimmer-parts-c-129_1861_1865.html

Try garage sales or eBay.

I show the part number as 42999 for the accessory and they also list 876669 for the 1/4 collet. Give me the general area with zip code and I will try and find someone locally that can help you

I still think that it is the bearings, especially since of the squealing noise which is a symptom of the bearing seizing up and the armature shaft would get hot transferring the heat to the motor housing. Give me the model number and brand and I will find a breakdown and part numbers for you and also if you give me your general location I will try and find someone local to get the parts.

How do I hold the armature still on a Porter Cable Model 1002 Router to take the nut off to change the inner bearing