I lost the disk to my pv-gs65 camcorder how can I get another one so i can use my usb connect?

This is most likely caused by a damaged or misaligned video drum and can usually be repaired fairly inexpensively. However, it's not a user serviceable problem and will need to be repaired by a qualified service technician.

My name is Rick and I'm a professional repair technician with over 20 years in the business and have repaired many of these. I'm semi retired and work from home with little overhead so I can keep repair costs low. If you decide to have the camera repaired, please click HERE for a directory listing that suits your needs.

If this response has been of any help to you, please be sure and give a positive vote for me on FixYa.com .

This can be caused by several problems including the transmission gear in the tape mechanism not engaging properly or a defective clutch in the take-up spool and can usually be repaired fairly inexpensively. However, it's not a user serviceable problem and will need to be repaired by a qualified service technician.

My name is Rick and I'm a professional repair technician with over 20 years in the business and have repaired many of these. I'm semi retired and work from home with little overhead so I can keep repair costs low. If you decide to have the camera repaired, please click HERE for a directory listing that suits your needs.

If this response has been of any help to you, please be sure and give a positive vote for me on FixYa.com .

Hi,
You can download it from the below link:
http://www2.panasonic.com/consumer-electronics/support/Cameras-Camcorders/Camcorders/MiniDV-Camcorders/Drivers-Downloads/model.PV-GS35.D
I hope this information allows you to resolve this issue.

If I have helped you, please help me, and rate this suggestion the highest FixYa rating. If you cannot rate this post with the highest rating, then please comment to this post and I will try to help you further.

Regards
Anand

Your camera records photos on card. So, eject the card, put it onto any card reader, and simply copy your images onto PC.
Second tip - download or install USB driver for Your cam. After installing, connect it to PC. Your card appears like a new disc on Your system. Then copy photos.
Be careful! Don´t unplug the cam. Eject it from windows safely! And during transfer unplugging the card means data loss!
Good luck!

u must open the camera and just remove motor connector and put 3 dc volt suppy on motor then it will wok

there should be a usb port on the camera. below the mic in, under the flap to the right of the on/off.
should be able to get this cable at any office supply/ camera store.

1394 PIN is device found therefore it needs drivers. Firewire drivers u can get free with this link

http://www.google.co.uk/search?hl=en&q=download+free+1394+drivers&meta=

The camcorder has a USB port to transfer your still images to your computer, You cannot transfer your video using the USB.

need panasonic usb pv-gs65 drivers cant fine any where dose now where to get it have copy email to me [email protected]

Take a magnifying glass to the firewire port on the camera. Check to see if it looks damaged at all. I've used firewire with my students for many years and this has happened to me on more than one occasion. The student is not as careful as he could be when plugging in the cable. The inside of the firewire cable becomes damaged. This is a cheap fix. Buy a new cable. However, when the port is damaged, it is an expensive fix. Since the computer recognizes another camcorder it may not be the computer. And if you are using the same cable, then it will probably be a hardware issue with the camera. Look at the port and let me know if anything looks out if place.