Panasonic code i cannot get it to switch on my panasonic viera tv

have you tried all these with the remote?
13833 18250 14039 15716 19503 12362 14333 12055 15532 15355 19617 15659 10508 16940 17845 12001 10916 14912 16513 18310 18810 11520 17127 17731 18649 18029 14852

How many times do the standby light blinks at one time switch ON? Count it. These blinks are called blinking codes and are fault indications. Form these number of blinks, you can get an idea about the faulty circuit section inside the TV. If you're sound in electronics, you can do it by yourself. If you wish to get more details http://electronicshelponline.blogspot.com/ about the blinking codes to Panasonic Brand Tvs, check the link. Pull up older posts there by its left side bar. Blinking codes to many brand TVs are give in detail.

Look for your cable wire to Panasonic Viera tv or switch on your tv hdmi.

This is an error code indicating failure of some board and might need attention by a qualified service technician. Switch off TV manually, switch off power, remove plug and retry after 48 hours.

Codes for PANASONIC: 0171 0148 0054 0170 0062 0374 0381 0437 0950 0003 0070

codes-0154, 0179, 0451, 0463

Something inside has failed.
The flashing is a code for the repair engineer to tell him/her what is wrong.

---

Please dont forget to vote if you liked my answer

thanks

------

the wii leads are colour coded look for the colours on tv then switch tv into that input mode e.g ( common or EXT ) make sure wii is on

You need to select setup from the TV menu then switch the Viera link on. I think retuning must have switched it off.
This worked for me

Hi
I have a Panasonic viera TX-32LMD70 TV and a Panasonic
remote control. I also have sky and I cant use the sky remote
control for the sound when I try to change it asking for the code
and I do not have any for the panasonic remote how came with the TV when I bouth it. Can you help me.
Thank you
Gill Plimmer