ONE FOR ALL REMOTE HOW TO PROGRAM TO MY TV'S

Magnavox 0054, 0706, 0030, 1454, 1254


SEARCHING FOR YOUR CODE
If your device does not respond to the remote control after trying all codes
listed for your brand, or if your brand is not listed at all, try searching for
your code.
NOTE: Before performing a code search for a DVD player or a VCR, turn on the device and
insert the required media.
For example, to search for a code for your TV:
1. On the remote control, press TV once.
2. Press and hold SET until the LED (red light) blinks twice,
then release SET.
3. Enter 9 - 9 - 1.The LED will blink twice.
4. Aim the remote control at the TV and slowly alternate
between pressing POWER and TV. Stop when the TV turns off
(after pressing POWER). If the device does not have a Power
key, you can substitute another function, such as digits 0 ~ 9 ,
CH, or PLAY).
NOTE: In the search mode, the remote control will send IR codes from
its library to the selected device, starting with the most popular code
first.
5. To lock in the code, press and release SET.The LED will
blink twice.
6. To search for the codes of your other devices, repeat steps
1 through 5, but substitute the appropriate device key for
the device you are searching for.
here is the maual for your remote:
http://www.ofausa.com/remote_manual/URC4...

I have a one for all URC-3220 remote that i need the code for my emerson tv

• I use the manual codes for The One for all remote and, despite my TV brand (LG) was not registered on the list, but I used the one for the only TV brand that start with LXI and trying all the last one work.

I have a sony tv, older model. it's not with me at the moment. i have a (one for all urc-4063b06) universal remote. can you please tell me how to program this remote to my sony? thank you