Mouse is not working. Replaced batteries but that did not fix it

ONN is Walmart's bargain basement brand of electronics all made in China at the lowest possible price point. They have failed within the warranty period, so return them for refund and buy a Microsoft or Logitech mouse. My Logitech is over 12 years old!

Ok don't worry. Sounds like you need to Unplug the mouse for a sec then re-plug it back in to reset it. If the mouse is wireless then try replacing the batteries. Cause a wireless mouse can still turn on if batteries are weak but won't have enough power to connect to the receiver connect to the desktop/laptop. Try doing so and let me know if this solves your issue.

Try replacing the batteries in the mouse. Sometimes the light will still come out of the bottom of the mouse - but the wireless signal is no good.

Also - after you replace the batteries in the mouse, click the sync button on the USB part that plugs into your computer, and then immediatly click the sync button on the bottom of the mouse.

That should do it!

1] unplug the dongle 2] press Windows Key and PAUSE'BREAK together This brings up a window ... click the device manager
3] Watch the screen 4] plug in the base station Under Mice and other pointing devices, HID_compliant mouse should now be displayed. 5] Underneath the dongle is a small button ... press it The blue light flashes about twice a second 6] Underneath the mouse there is a hidden small button- directly under left button -- press this 7] the dongle will flash really rapidly 8] soon the mouse/dongle start to "talk" to eachother, then settle down
Your mouse should work now
Regards

Steve H

Rechargeable batteries do expire after a while either get new ones or get a battery tester to see how much life they have left. under normal circumstances a new set of batteries last me about two weeks before i have to recharge them and my computer stays on 24/7 including the mouse with at least 5 or more hours of use per day.

Easy fix, no. The fix is to replace the palmrest assembly. The required a large amount of dissassembly of the system.
Work around
Use a USB wireless mouse

I don't know if this is the same as my mouse. However I have a satellite1955-S803 with wireless detachable keyboard and full sized optical wireless mouse. The original owner said it came with the laptop.
First I tried very hard to get the keyboard working. After a frustrating day of calling Toshiba, I noticed the "detachable" latches. I removed the keyboard to find a battery compartment. 4 days go by with me calling Toshiba trying to get a replacement. Finally found a battery at batteries plus that does work. about half the mAhr of the original but hey it works.
Now to the mouse. Replaced the AA's batteries but couldn't tie the mouse to the computer. I run linux so no M$ driver would help. Finally found a PDF of the manual and it says "if the mouse has trouble activating, press the wireless mouse button on the laptop."
That button is on the front left edge of the laptop (where the "Intel inside", "XP loaded", and "nvidia" stickers are located ) just to the left of the front silver "mode" button. Under the mouse press the connect button. (round near the optic laser but un-labled) then press the wireless mouse button on the computer and there you go. It just connects and works.
2 weeks I looked for this and it was just that simple.

You probably already tried this.
Normal 0 Turn the mouse over and find the small rest/connect button on the bottom of the mouse and press it. This should connect the mouse to the receiver and work properly. If not, try pressing the receiver button and then press the button on the mouse. This should be done whenever you change batteries or glitch. Hope this helps you. Bud

Hi
there is a reconnect button on the receaver I beleave you need to press the reconnect button on the receaver first then the one on the mouse to reconnect. Also make sure you have charged and working battery in place.

This seems to be a old problem and if you don\t need assistance in solving it. It would be great if you would share to the world how you fixed your problem so other users can benefit from your experience. 


Thank you,  

Ekse