New fix for coolsat 6100

The 5010 error indicates a scanner error. The scanner unit cannot detect the home position, or the scanner unit warming-up is not done properly at power-on. On the LCD, "Scanner is not operating correctly." is displayed.
The 6100 error indicates a logic board error. The check sum value is incorrect in the ROM check at hard-power-on.
Fixing these errors is more expensive than replacing the printer. Sorry.
Fixing F

Please get it here : http://www.manualnguide.com/download/manual-guide/coolsat-6000-users-manual.html
http://juicyfinder.com/Coolsat-6000-Manual.html
(copy this link on your search engine bar) Regards

this is the software for the coolsat 6000 TV system

Is this an HP printer? If so check the startup tab in msconfig and uncheck the HP webprinting or print to web (something like that). You can also uninstall the printer and reinstall it to see if that fixes it.

Hope this helps

if your hooking it up just to ur TV you would need The RCA Video Cable, Video- yellow, Red - right, white is left,Witch is printed on the back of the box, this would go into the output an go in to TV input
Hope it works

The driver that's needed for docking station (it's more a port replicator than a docking station) support is Toshiba's Mobile Extension 3. After that, it oughta support warm/cold dock/undock.

Go here to find and download Mobile Extension 3: http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/modelContent.jsp?ct=SB&os=&category=&moid=160273&rpn=PS610U&modelFilter=6100&selCategory=3&selFamily=1073768667

lgkh
ujh kjkl

www.ftabins.net

Try this,

Reset Fuser Life

1. Using the control panel buttons scroll to Maintenance, press OK.
   
2. Scroll to Check Others, press OK.
   
3. Scroll to Fuser, press Reset