Hp netbook is not detecting cooling stand when it is plugged in,no software with the cooling stand it should work right out of the box and plugged in. the fan blows but speakers do not work

Blow or vacuum off the dust through the vents or else open up the netbook and oil the fan pivot or replace the fan

If U r using Internet Explorer from windows Go to Tools -> Internet Options -> Connections -> LAN Settings and TICK automatically detect settings and remove all other ticks from all other boxes.

Be sure your firewall is activated. You can chose to use the windows firewall pre-installed on your Netbook or you can activate the firewall in you anti-virus package.
Run a cleaning software designed for detecting spyware on a regular basis to maintain Netbook processing speed and to remove items picked up by your Netbook while surfing the web. CCleaner is a solid free version of spyware cleaner.
If you suspect malware on your computer because it is running slowly, has strange pop ups or the anti-virus software detects it, then download software designed to find spyware and eliminate spyware. Malwarebytes Anti-Malware, A-squared Free and SuperAntiSpywate Free are free versions of adware removal tool to consider. These tools get rid of spyware when used individually or in tandem. Continue to run the software until all spyware, viruses and malware are removed.

How To Use the Restore Factory Settings CD
1. Make sure to transfer all of the files you want to keep to a USB memory stick or burn to a CD.
2. Put the Restore Factory Settings CD into the CD drive. This CD was packaged with your computer.
3. Confirm you want to restore the factory settings. The computer will begin restoring all settings. Don't disturb your computer, as this process can take several hours. .
4. Reboot the computer to complete the process.

try to check on hp site. www.hp.com. at search box type in the model. Locate the right model, download the driver. Install the driver (as admin). restart, while restarting plug in the printer. it should detect.

dear sir i have a pc in hp 110-3000 tu win starter i interested in win xp i instoll xp then virus detect any selution plz my email - [email protected]

Simple get this software and it is for free!

You need to re-install the webcam drive first..
Then you need to re-install the youca software..

Try this:
1. Disconnect your HP computer, so that only the MSI Wind is connected.
2. On the keyboard, hit [Numlock]+[-] then press [A] (this will auto-search for the computer that's connected, and connect both keyboard and mouse to that port).

Give XP a minute to detect new hardware. If XP does not detect the mouse, try plugging the mouse into a port directly on your netbook. If XP still does not detect the mouse, it's XP that's not detecting your mouse properly, not the kvm switch. :) If it does detect it, you should be able to then plug it back into your kvm switch and it should work at that point.
Note: if you get stuck with lights flashing on your keyboard, just hit [Esc] on the keyboard. That will reset the KVM switch.
Hope this helps!

Try this...right before it boots up hit Ctrl key-F11 key. This works for my dell PC. Restores setting to factory default. It may work for you since it's same vendor.

Do the following:

1. Unplug the scanner's USB
   
2. Right-click on My Computer and select Properties
3. In the Hardware tab, click on Device Manager
4. Under Camera's and Scanners remove any HP scanner items that exist already (right-click and delete)
5. Restart the computer
6. Install the latest drivers for the scanner from the HP site (don't go anywhere else)
7. Plug in the scanner

If this does not work, try plugging the scanner into a different USB port and see if it gets detected.