The screen is jumping up and down for this IBM P202 Monitor

It could be some loose connection, check both end of the VGA cables. If this does not resolves the issue, then check if you monitor is near a high voltage cable/magnetic waves/microvave(microwave oven).
If this still dosent resolves the issue, click on the OSD menu option on the monitor, see if you find Degasus, try and use that. If not you need to repair your monitor.

All the best.

Regards,
Shrey

Your problem my friend is cable betwen pc and monitor, it is brocken! you must be fixed by an expert, but not at high price! If I,ve helped you rate me! Thanks!

It may be due to the screen high screen voltage . You can correct it by adjusting screen control on the flyback transformer .

ur screen is jumping up and down because of lack of settings.
open sittings and adjust the magnetic settings so that jumping and bubbling of screen make it in control...

When you connected the external monitor thto the laptop did it display?

If so then you have to reset the monitor port. Hold down the function key and find the FKEY that shows a picture of a monitor. Press that until you get the laptop screen back.

Typical use is:

• 1 press = external monitor
• 2 presses = laptop and dual monitor
• 3 presses = just the laptop screen
  

Praveen,

Does this occur at all resolutions/refresh rates? Did you try changing the resolution? Is it rolling or just displaying multiple screens - similar to this - http://www.fixya.com/support/t659986-many_screens_one_monitor

I had vertical rolling on the same monitor at 800x600. Changing it to 1024x768 was my "fix".

Your monitor is malfunctioning and requires servicing. Unfortunately there is no software solution, and no monitor adjustment buttons will control this problem. Due to the high cost of replacement parts and service technicians, it may be more cost effective to buy a new LCD monitor. Sorry to be the bearer of bad news :(

my monitor IBM e54 have a problem its like the right button from the monitor automatically activates. so everytime i work contrast box appears. how can i solve this problem?

The solution may be one of several things. here are my ideas in increasing severity.

1) Bad connection. Fix: tear apart the screen and check the video connection. It looks just like that when you don't have a good connection with the sync signals from the motherboard

2) Bad screen. Check video feed to external monitor. Shut down laptop. Plug in an external monitor. Start it up and the external monitor should show a good picture if the problem is a connection or a bad screen. If it's a bad screen, you will need to replace it (easy to do at home for 1/3 the cost of some outside source). Go to ifixit or instructables or repair4laptop to get ideas and walkthroughs. So, good feed to external monitor and no bad connections=bad screen... maybe.

3) bad video card. Replace motherboard = $$$. this is more difficult to do at home. If the external monitor shows the same streaky picture, you're pretty much guaranteed that you will have to replace the motherboard.

try pushing on various parts of the computer to see about bad connections, usually two thirds to three quarters of the way up the back of the screen is the connection and somewhere under the keyboard is the video card. don't press too hard, but see if anything's different when you try it. Good luck.