Philips HDTV model 60PP9202/17F

Its a convergence problem. The three color guns have drifted and it shows on the edges. Typical of an old projector tv
These will help
www.youtube.com/watch?v=esk4nYZKFcg how-to instructions: www.ehow.com/how_2034880_perform-convergence--tv.html

What is the Exact model number to your TV?

ok you have two different model #'s here so i went and found both pdf manuals , i assume the 32mf605w is the one you want though . but here is both

32mf605w link here , just scroll down and type the numbers shown below click download and open with adobe reader , once downloaded scroll down to page 7 , as you can see the controls are on the top of the tv

http://www.retrevo.com/search/v2/jsp/mytrevo/myTrevo.jsp?page=man

50ml8105d link here , scroll down to page 5 , as you can see the controls are just below the screen in the middle , probably behind a flip out or up door .

http://www.retrevo.com/search/v2/jsp/mytrevo/myTrevo.jsp?page=man

http://www.tvrepairkits.com/download-guides/tv-kit-001-002.pdf
www.scribd.com/.../Philips-DPTV400-TV-Projection-Training-Manual
www.scribd.com/.../Philips-Training-Manual-TV-Plasma-Display-Panel-Chasis-FTV1-9 -
Service & Repair manuals for your unit.
Sounds like your set has developed a "Color Mixing" problem, Please use the troubleshooting procedures and you will soon be able to find out what to do.

Probable blue CRT convergence or clouded blue CRT.

you are gonna have to take this apart,lay flat on table to remove the cover.first look at the power supply board,you are looking for swollen caps(round canaster-one side is marked - in black meaning negative.this tv came with 2 versions of power supply.part numbers 272217100569 phillips or DPS-279CP A delta.if you do not see any bad caps look for a bad fuse,replace if bad.if it blows the fuse again inverter boards,part numbers 6636L-0022A and6636-0021A.all of these parts are available at shopjimmy.com,just type in model number,scroll down to find any of these parts.

my philips projection tv model number 50pl9126d/37 has a dark screen

hi i have a philips 42 pfl5522d and need a new screen can you get me one..

Whats the model number, as thats usually a bad HOT transistor or flyback the causes that. Please respond to this same post with your model number and I will try to assist you with the problem.

You need new convergence ICs two of them numbers STK392-110 they are available at the following link and they provide free installation instructions with pictures as well as free online tech support while you do the repair which takes about an hour. Heres the link.
http://servicemanuals.vstore.ca/