20 Most Recent Philips 42PFL5603D - 42 IN. LCD HDTV Questions & Answers


If you wish to get more details; check the sites linked here. It has set-up code list & set-up procedure to many popular brand remote controls. Common codes to check devices with different brand TVs are given, in the order of the device's brand name list in alphabetical order. Pull up older posts. Surf the site with patience. Surf the sites by type in the brand name to your set, in its search box.
http://electro-medical.blogspot.com/
http://remotesearch.blogspot.com/
http://electrohelponline.blogspot.com/

Philips... | Answered on Oct 06, 2014


This is a very skilled work, as the brand name is Philips. It will be best to contact the authorized service center in this case; I suggest.
If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience. http://electronicshelponline.blogspot.com/

Philips... | Answered on Sep 02, 2014


Check the remote control for its infrared emission. Check it with fresh batteries. Clean the battery contacts inside the battery compartment. Check them for any rust or dust accumulated. If you wish to get more details about how to check a remote control, check this link. If remote control is found OK, the infrared sensor inside the TV should be checked and replaced.

Philips... | Answered on Jan 30, 2013


The main power regulator board should be checked for any loose solder terminals. Re-solder all the suspected solder terminals there. If you are not familiar with electronics, do not attempt to repair! Whether you suffer fatal electrical shock! Instead, contact the nearest service center!

Philips... | Answered on Jan 17, 2013


try Ebay, shopjimmy.com, retechtvparts.com

Philips... | Answered on Oct 03, 2012


This tv is having a power supply board issues,that the electronic board where the tv power a/c cord plug into it.This is a new tv.Return the tv where u bought it quickly and get a new tv replacement.

Philips... | Answered on May 08, 2011


Could be a dry joint on the Inverter for the tv which is causing the Relay to Click off due to surge in the power or blown capacitors.

Philips... | Answered on Mar 22, 2011


To purchase a new LCD screen is too expensive and not cost effective. You are doing the right thing by searching. Unfortunately, these TVs are still new and finding a salvaged one will take time. The demand right now, for a salvaged screen is in much demand. You must be patient, and time will find one. You may may try the "Shop Jimmy" website. Or check out Encompass TV parts. Sometimes they may have a salvaged one...once again demand is high and the search continues. Just continue to be very patient. Yard sales , pawn shops and continue visiting your local TV shop for one. Good Luck and thanks for asking and show a few hands of support!

Philips... | Answered on Jan 02, 2011


If you were to log on to the manufacturer's web site, I think you will be pleasantly surprised as usually one is able to download, by model number, Customer Instruction Manuals, and a list of Dealers for spare parts, as required.

Just Google the manufacturer's name and follow the links. Make certain you are directed to the manufacturer's web site as some search engines direct you to other sites and they charge for the information that is normally free of charge.

I hope this helps.

Philips... | Answered on Dec 09, 2010


Power LED light indication flashes?Yes,u want to fix it,there are no one or any specific capacitors to be replaced.The power supply board is the board,where the power a/c cord plug into it.Must check the whole power supply board,looking for dying and about to be dead capacitors.These capacitors are alway bulges or puffing up on it tops are the problems and the causes.These capacitors are dying,a must to be replaced.But if u plan to be replacing dying capacitors?Tools,u must have.A soldering iron,a desoldering pump or a roll of a desoldering braids,a roll of solders also a basic understanding of electronic and soldering is a must.Or tries websites like Shopjimmy.com,Ebay.com to buy a whole refurbish power supply board for the replacement.

Philips... | Answered on Dec 04, 2010


You give insufficient information to provide you with a more streamlined solution, so excluse me for being too brief.

What I'd do if I were you is to try and re-flash (update) the firmware in your TV.

if that doesn't help you'll likely need a new main board.

TO update the firmware you'd need the exact model of your Philips. 42PFL5603D has two versions - /F7 and /27.

The update for the first is at
http://www.p4c.philips.com/cgi-bin/dcbint/cpindex.pl?ctn=42PFL5603D/F7&slg=en&scy=US&mid=Link_Software

The second is at
http://www.p4c.philips.com/cgi-bin/dcbint/cpindex.pl?ctn=42PFL5603D/27&slg=en&scy=US&mid=Link_Software

Those are Philips provided and supported pages, so you should be able to find your way around there.

Hope this helps. If it does, please rate it with thumbs up - we need your votes if we can't get your money :-)

www.coppelltvrepair.com

Philips... | Answered on Oct 18, 2010


It is possible that the TV was hit by a small power surge, and the processor has some garbage in it, and you need to leave it unplug for 40 MIN, and that will reset back to normal. Make sure for at lease 40NIM,

Philips... | Answered on Oct 18, 2010


A BLUE screen means that there is NO INPUT signal, are you sure you are connected up OK? ON channel etc. If you have and are, then you set has faulted, in the Tuner signal processing section.
www.p4c.philips.com/.../42pfl5603d.../42pfl5603d_10_pss_eng.pdf
Above is your user manual below is a service and repair how to, for your generic Chassis.
http://www.4shared.com/document/choTdoCC/TV_PHILIPS_LCD_Chassis_L05HD_T.html

So, it is nearly always my professional opinion that one should always get a "Quote" form the manufacturers recommended service center, I cannot stress how important that last point is. It is even worth the cost of shipping. you see an authorised service agent, will have trained staff, trained on their brand, also they have first hand access to parts, original parts. This will actually save you money and ensure you can actually get it back fixed. Of course asking for a "Quote" also gives on the option of repair or replace.

Philips... | Answered on Aug 11, 2010


You have to check the 24vdc power supply to see if it is putting out the voltage or the backlight inverter board has failed. Disconnect the inverter board and see if the 24vdc come back.
If you are going to DIY and have proper tools, electronics knowledge, and know safety precaution then please read on:

Please see my basic troubleshooting guide here:
http://www.fixya.com/support/r5093881-lcd_flat_panel_tv_troubleshooting_guide

http://s807.photobucket.com/home/budm/allalbums

http://en.wikipedia.org/wiki/Capacitor_plague

Parts: www.shopjimmy.com

Philips... | Answered on Jul 11, 2010

Not finding what you are looking for?
Philips 42PFL5603D - 42 IN. LCD HDTV Logo

70 questions posted

Ask a Question

Usually answered in minutes!

Top Philips Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76455 Answers

ThaMp3Doctor
ThaMp3Doctor

Level 3 Expert

8597 Answers

matt martin
matt martin

Level 3 Expert

1258 Answers

Are you a Philips Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Philips Televison & Video

  • Philips Televison & Video

Most Popular Question

while watching tv buzzing

  • Televison & Video
Loading...