At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
The "OC ERR 1" code is a sign that there is something wrong with the speaker connection(s). Mostly one of the speaker cables is causing a short-circuit, which triggers the safety system. Power off the unit and pull out the plug. Check all the speaker connections (amplifier and speaker side) and make sure that no (parts of the) cable is (are) touching the chassis. Twist the cable ends to a single core if necessary.
To
switch your Pioneer DV-400V DVD player back to an interlaced video mode
after selecting a progressive scan mode and losing picture, follow
these steps:
Switch everything off.
Switch the player to standby.
Press and hold the Standy/ON button while pressing the
|<< button.
This resets your Pioneer DVD-400V player HDMI
output format to 480p.
To switch your Pioneer DV-400V DVD player back to an interlaced video mode after selecting a progressive scan mode and losing picture, follow these steps:
Switch everything off.
Switch the player to standby.
Press and hold the Standy/ON button while pressing the |<< button.
This resets your Pioneer DVD-400V player HDMI output format to 480p.
The laser is not working, or a motor quit. try unplugging it and press the power button for 10 seconds before restarting it with the cord in the wall.
Check if there is a reset button on the back, The button will be small like a paper clip size eject button on the dvd player, to get the disk out. It will be in small print. Good luck.
Bill
You need to replace the IC Amplifiers that is near the channels when you open the player (make sure it is NO LONGER under warranty or else you'll void it). The cause perhaps is that your speakers have been shorted.
×