Dlink trouble...on hooking up.

Learn to use google - it will help you!
Set Up New PS3 System
Playstation How to Hook Up Video Connections on Playstation 3

There a great article at General Router Setup.


If you need more help post back!
Thumbs and testimonial are welcome!

Dlink DI 784 Login Instructions https://www.cleancss.com/router-default/D-Link/AirPremier_DI-784

there is posibly a sync problem try using two dlink routers .

There's a cable that comes from the modem that plugs into the WAN port on the dlink router. Then you connect one of the other ports(1,2,3, or 4) into the network card on your computer. The connection and network cable look like a phone cord/connection just bigger.

You must reset your PS3 in order to accept the new TV configuration.

If the video output settings on the PLAYSTATION®3 do not match those of the cable or TV in use, there may be no picture. If the screen goes blank, turn off the system.

Then, with only the PLAYSTATION®3 and the TV connected, touch the system's power button for more than 5 seconds to turn the system back on. The video output settings will automatically be reset to the standard resolution.

From: http://playstation.custhelp.com/cgi-bin/playstation.cfg/php/enduser/std_adp.php?p_faqid=967&p_sid=1frk_Cuj

Hope this helps please remember to rate my response, thanks!

OpenSource13

I did that once, left it like that for about 3 months till I was bored and decided to mess with it. I then remembered It had a Reset button. Press that and everything should be back to narmal.

hook playstation 3 up to the internet and download newest updates

you need a ps3 scart lead. i think the one of the ps2 is the same but check. it should just hook up like a ps2. if you are having any problems with the picture hold down the power button when you start up the ps3 for 10 seconds this runs the optimal screen settings for the cable you are using. but if it is the first time you are using the ps3 it will auto start in set up mode. hope this helps

I have a problem. I have everything hooked up and when i go for a connection test it says my connection has failed because there is an DNS error. What is a DNS? and what do i have to do to fix it?