How do I set-up my WLAN card to my HP iPAQ Hw6515

The IPAQ 6515 will only work with GSM Simm and network. It is also NOT 3G compatible.
You can verify that the 6515 is working with another network SIMM, then it is likely that your Simm card is not compatible and may in fact be design on Afghanistan's 'Analog' network.
Incidentally, the 6515 will also not work in Japan even with a working 'roaming' SIMM as the Japanese Mobile Network is also not compatible!
Hope it helps!

put on charger,hold down power for 10 seconds for reset

Make a hard reset in your phone. You will lose all the information and the settings , but your phone will wirk again.

To make a hard reset, check this:

http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&objectID=c00682291&jumpid=reg_R1002_USEN

Wish this help you!

Your 8 Gig card is a SDHC (HC=High Capacity) Card. All HC cards use a different format, which the 6515 can't use...

The biggest capacity the 6515 can use is 4 gig on the SD and 2 gig on the mini SD.

My 4g Transcend card and 2g Sandisk cards have been faultless for about 2 years now.

Sorry, but the 8 gig card is a wonderfull card, but is useless in a 6515

Get the correct settings from your service provider, though most have an automatic service for this. Go start - settings - phone - network tab. and enter the settings

yes if you change your text messaging settings an go through an put show an acept all senders you will get ur messages if you need help reply an ill send u a infomation bucklet

When connected with Activesync you can use your Internet connection on the PC. In the Activesync Window: Options/Rules/Pass Through - Connection: The Internet Then leave the PDA in the cradle and access the Internet on the PDA, works automatically ever after.

Buy a WLAN sdcard to get WiFi connectivity. You will still have the second minisd slot available for a memory card.

Sounds like it might be time to test things in a vanilla fresh setup.......... -Backup your system via iPAQ backup to an SD card (or ipaq file store if you have room) Warning, following will delete all main memory and set back to factory default! -do a hard reset (hold in power and reset for 20 seconds) -Test programs again, see if it acts the same. You can then restore your setup via iPAQ backup again if needed. You can also poke around the following site for suggestions on tested task managers and today screen apps. (I use HandySwitcher)

There is a SIM manager , you can go there to download all your SIM contact to Ipaq address book.