Need to repair will NY turn on no light tray will not move to change pictures

Please try to replace the control board..it will end the issue..

Contact Mfg for Wnty free repair, or take back where you got it, before 30 days.

Try CPR in New York City. They are faster than the manufacturer, and cheaper! They have a usual turnaround of 3-5 business days. And if you become a fan on their facebook page, mention it and you will get a 10% discount.

Here is the link to their facebook page, it has all the info you need.

http://www.facebook.com/pages/New-York-NY/Cell-Phone-Repair-NYC/312054784441


Hope it helps!

Either the power motor has failed or the fan belt has broke. With the lamp removed (important!!), turn the projector on and see if the slide change mechanism functions. If it functions (moves your slide tray back & forth), then chances are that it is the fan belt. If it does not move the tray, then I would suspect the lamp thermal fuse has opened. Either problem will require a repair by a factory-trained repair dealer.

if you hear chirping or a loud buzzing, you have a bad colorwheel. the lamp won't turn on if the colorwheel doesn't spin as fast as it needs to. if you don't hear anything like that, you need a new power supply. the lamp striking takes a lot of power, and if the power supply can't handle it, it shuts off. you can get the part from an infocus service center and replace it yourself, or send it to them for repair. either way, try av solutions in ny. they're really good. www.avsolutionsny.com

the light tunnel is collapsing and needs to be replaced. common problem with this model. you could buy the part and replace it yourself, but it's pretty difficult and involved. or you could send it in to an infocus service center for repair. either way, try av solutions in ny. they're good. www.avsolutionsny.com

Your motor maybe going bad. Try sending it to PhotoTech Repair Service in NYC. They are Nikon authorized, and can do the repair under warranty if you still have it. Also if you join they're facebook page, they will give you a 10% discount.
Here is the facebook page link, it has everything you need to send it in.
http://www.facebook.com/pages/New-York-NY/PhotoTech-Repair-Service-Inc/102527215194

Your motor may have gone bad. Try sending it to PhotoTech Repair Service in NYC. They are Nikon authorized, and can do the repair under warranty if you still have it. Also if you join they're facebook page, they will give you a 10% discount.
Here is the facebook page link, it has everything you need to send it in.
http://www.facebook.com/pages/New-York-NY/PhotoTech-Repair-Service-Inc/102527215194