Asus rx3041 configuration

You will need to do a "hard reset" which usually requires you to hold in the reset button (30 sec) as you turn on the device.

They always warn against changing settings over the wireless for exactly this reason.

Hi,
Please use the following link to download the drivers for your Motherboard.
http://www.nodevice.com/driver/RX3041/get33983.html

check your cmos battery. it may be dead which is why your bios settings are getting reset everytime you boot your pc.

Hello,

For whatever reason, your router is having trouble handling the traffic with both computers running at once.

This might be a small issue concerning the routing table.
Since it does still work generally, I would try simply reseting the router.

There should be a small pin hole on the back of the router to reset it.

Thanks,

Pat

Your cmos battery is dead and it can't remember the settings. Find the small button cell battery on the motherboard and replace it with a new one. You'll be asked to enter the settings one more time. If that doesn't work make sure the cmos/bios reset jumper is set to standard and not reset.

Off course it will work but you the software from your ISP. It is resposible for connecting to your ISP which then assigns a dynamic IP for you for each session and the IP is whichever happens to be availble at the ISP's server end.................sodeep

I've settle my problem. Set the correct VPI and VCI provided by ISP.

perhaps more details??

Hello, Here is a link for your router. You may have to do a search from there for Vista driver. Hope this helps.
http://www.asus.com/products.aspx?l1=4&l2=21&l3=0&model=574&modelmenu=1

Basically means you aren't getting any DNS service.. Check your IP settings