Need Unlock Code for Kenwood MP235 car stereo

The code is the anti theft device that you will need to get the machine to work again. It would have come in the box when you bought it or be in the operators instructions book that came with the machine. Other than that contact the maker and see if he can help. You may need proof of purchase. model no, etc to get the info.

You need to provide the model number to unlock it

Dont know if this will help but here is a 911 manual. One guy recommends trying the numbers 0000 and 1111 and so on. Otherwise, a trip to a Kenwood shop and a $20 bill is required, Sorry.
http://www.kenwoodusa.com/UserFiles/File/Global/Consumer/Manuals/KVT911DVD.pdf

Unfortunately Kenwood codes are only available from the Main Dealer or by using a Radio Decoding Service who will connect a laptop to read the working code inside your radio`s memory chip (EEPROM)

need unlock code bought used car battery died stero needs code dealer has no idea

Unfortunately Kenwood codes are only available from the Main Dealer or by using a Radio Decoding Service who will connect a laptop to read the working code inside your radio`s memory chip (EEPROM)

let me have the serial number and i may be able to help

no,it need to go on a machine to have code reset or removed,any car stereo store should help

you need a remote for this .
Common Kenwood Security Codes
Many Kenwood radios are configured with the same security codes:

KCAR - This seems to be a "backdoor" to some Kenwood models.
3051 - This is the security code which is printed in the manual of many Kenwood models.
1234 - This is a security code commonly chosen by Kenwood owners.
Entering Your Kenwood Security Code
If the car battery fails or is disconnected, the Kenwood will ask for the security code.

The procedure to enter your security code differs on various models of Kenwood car stereos. Here are three of the more common procedures:

Type 1
During the code request mode, while holding the DISP key depressed, press and hold the Volume UP or DOWN key for 3 seconds until the "..." display disappears.
Enter the security code using your Kenwood remote.
Type 2
Press the "Auto" button and "Track up" on the face of radio at the same time until the four dash lines disappear.
Enter the security code using your Kenwood remote.
Type 3: Model# DPX-4020 and DPX-4030
Press and hold the 1 then the 6 preset keys until the display shows the letter 'C'.
Enter the security code using your Kenwood remote.
Entering Letters on your Kenwood Remote
To enter a letter using your Kenwood remote, press a button once for the first letter, twice for the second letter, and three times for the third letter -- then press the Track Up or Next Track key to send the letter.

To send the letter 'A', press the 2 key once and then press the Track Up key. To send the letter 'B', press the 2 key twice and then press the Track up key.

Finally, when you are done entering all of the letters, press and hold the Track Up button for 3 seconds.

The key sequence to enter the security code KCAR is:

5
5
Track Up
2
2
2
Track Up
2
Track Up
7
7
Track Up
Your Kenwood should then enter tuner mode.

A Security Code Bug in some Kenwoods
There is a reported bug in the security code handling of some Kenwood stereos. In models with thie bug, the security code is stored incorrectly. The workaround is to enter the wrong security code.

In models with this bug, you have to decrement the third character of the security code by one. If your security code was 1111, you would enter your security code as 1101. If your security code was 9999, you would enter 9989.

Ebay auction number 170150626863
will unlock your unit for $40.00 or you can contact
Kenwood at 1-800-KENWOOD (536-9663).
Good Luck
Leadispenser